Re: TC-P50VT20 10 Blink Code
still 10 blinks. Does it indicate more like A-board, which might have defective already before mounted? Or two board at once. If only SS board would be broken then white screen should appear to the screen, isnt it? Ok, talk futher another day. Good night and much appreciation
matu
Member
Last Activity: 05-12-2016, 12:12 PM
Joined: 05-07-2016
Location: Parnumaa
-
Re: TC-P50VT20 10 Blink Code
cable with brown wires is D25. Couldnt find D3 on that board.But disconnected
it and tried, no white. all wires put back on and tested without the tuner card, still same issues.When it makes a click after pwer on, the green lights on SS and SC fades soon away. The power board is also changed. Probably old boards work also. I can try and have tried different combination of P-board,A-board and D board.so far no luck....Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
acctually TX-P42VT20E if its make any difference. Where is D3, do you mean D31/32? will make this last test and leave it peace for a wile, expect you have late night over there already. report back if any changes. thanks a lotLeave a comment:
-
Re: TC-P50VT20 10 Blink Code
wired these two, disconnect others. made a sound as switching on....click and thats it, no white screen or indicator lights in front. hard nut to crack
Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
quite big files but detailed. links
1.[url]https://drive.google.com/file/d/0B23-r6R33aTYX3lOcFV6cl9kWU0/view?usp=sharing[/url]
2.[url]https://drive.google.com/file/d/0B23-r6R33aTYZUNSMmlhVGtPbU0/view?usp=sharing[/url]
3.[url]https://drive.google.com/file/d/0B23-r6R33aTYcVN3b2VPbEJFVU0/view?usp=sharing[/url]
4.[url]https://drive.google.com/file/d/0B23-r6R33aTYMTJrbGN1dFBsOUE/view?usp=sharing[/url]Re: TC-P50VT20 10 Blink Code<br /> ...=sharing[/url]...Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
pg 36 not much sense to me but great help definately.
so did as you guided and TV doesnt power up at all, very strange.
wait and try one more time.Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
yes, only two c boards on the bottom.I can provide photo from the back if needed. Thanks for your effortsLeave a comment:
-
Re: TC-P50VT20 10 Blink Code
Thats what i did:
TV off.
disconnect:
SC board
SC2, Sc20, - disconnected, same numbers on my SS board
SS board:
ss11, - disconnected from P-board P11, SS11 cant reach
P-board:
P35, P65, - on my board there is P35 and P6( which is connected to A-board),both disconnected. P25 goes to D-board, stay connected.
D-board:
D31,D32,D33,D34 - on D-board there are D31 and D32 (disconnected both).
Others D20...Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
no. there is always only 10 blinks, SS and SC disconnected both or only one at time. Two second green flashes, relay click and 10blink failure code.nothing on the screen.Leave a comment:
-
Re: TC-P50VT20 10 Blink Code
Hi, i have a similar problem discussed above but refer to model
TX-P42VT20. Well, continiously this TV gives me 10 blinks error code when switched on. I have changed the main A board for the beginning which didnt give a result. Then I changed the SC board, following with D-board, no big difference still 10 blinks error. All transistors and diods are checked on SC boards for short before installed by my tech.friend also SS boards seems to be working. If I switch tv on with orig. videoboard, on the board the optical red lid is on. I did the test...Leave a comment:
No activity results to display
Leave a comment: