Re: Sceptre X20WG-1080P not turning on

hi again
its cecil61443 here.
boy do i have problems. first i did something stupid, i just look at the pictures posted above and saw what i wanted to see. it is the same pc board but, i didn't really check the caps out that closely, or just plain miss read them. i guess i was just to lazy to do it right. so i ordered the parts from the list from above and very little matched. here is my list of caps that my monitor needs:
1; capxon 1000uf 16v, KF105`c, c719, vent, dia. 7/16 x 7/8 length

2; capxon 1000uf...

Re: Sceptre X20WG-1080P not turning on

hi again
this is a whole new thing for me
this will be my first a temp to fix anything like this
i am totally new to ordering parts
i did get my parts order,but a few things had to a backorder
so in a about a month i will get my parts and i will try fixing this moniter
i will let you know how it goes
later
cecil61443

Re: Sceptre X20WG-1080P not turning on

Hi Again
I Tried Going To Digkey.com And Looking Up The Parts On That List.
When I Type In The Number, It Just Come Back No Such Part
Please Help Me
Thanks
Cecil61443

Re: Sceptre X20WG-1080P not turning on

hi there
its the same problem that cerberus had with their moniter.
took it apart and the same cap is bad.
the list of parts are the same

9 ea - 470uf, 25V, P12388-ND EEU-FM1E471 Double check the diameter, you may have to go with P10274-ND EEU-FC1E471L for the three in the audio amp section.

#5 - 100uf, 16V, 493-1779-ND UPW1C101MED

#8 - 10uf, 50V, P10316-ND EEUFC1H100L

#12 - 22uf, 50V, P12927-ND EEU-FM1H220


again where can i order the same...

Re: Sceptre X20WG-1080P not turning on

i just got into it a few minutes ago. once you get the front frame off, you separate the screen from the sides. you turn it over and remove two stickers from either side of the base where it attaches to the back. someone said to always check under the stickers for screws. there was three on each side.

one more question how do i order replace parts for it?

Re: Sceptre X20WG-1080P not turning on




how did you get into your monitor?...