Re: Samsung plasma PS60E6500




Buzzing is coming from the circled area mainly. Its 37 dB not so much but Im paranoid that it might be the reason for shorting something in the future. Also in the past while the tv was working often a pop was heard every now and then as the set was warming up, it was a sound of plastic expanding or something.

Is there a test to see if some component is drawing to much current?

SVC XOUT voltage is changing depending on the tv picture.

Re: Samsung plasma PS60E6500

Checked all the solder points and they all seem to be OK.
Tightened all the screws to the max and buzzing is still present.
I've noticed that SVC_XOUT VOLTAGE IS 106V is that good or bad? I can't find the reference value for it.
All the other voltages VS,VSC,VE AND VA are within the spec.

Re: Samsung plasma PS60E6500

Hopefully its not some problem with x board that caused the short on PSU.

Re: Samsung plasma PS60E6500

Managed to buy a new PSU board and the Tv is working, all the voltages are correct. Only thing that I notice now is the buzzing noise coming from the x board.

Is there a fix or a known issue why there is a buzzing sound coming from x board?

Re: Bn4400513a Samsung power board

Hi did you manage to fix the issue with this supply board? I have the same tv (EU model) that has PSU problem, tried repairing it twice in repair shop but after 10 days or so the board shorts out.

Re: Samsung plasma PS60E6500

Sadly they are one of the biggest repair shops and electronic parts shops in the country, and official Samsung service partner.

I can visually recognise the parts that have been replaced and use a digital multimeter and also I have poor soldering skills. My main concern is will a new board solve the problem or could it be that the issue is with the x,y sus or buffer boards causing the PSu to short?
I've seen on avsforums a lot of complaints about pn7000/8000 series concerning Power supply boards.

Hi I have an issue with this models PSU unit, a month ago all of a sudden something popped while watching tv and a circuit breaker switch triggered. Took it to a repair shop and they diagnosed a burned PSU unit, replaced transistors and it worked for some month or so. It shut down in the meantime few times, with 5 led flashes and a loud pop was heard again. Took off the PSU board and they replaced some more components (transistors and a popped capacitor ) after installing the board back in the tv everything worked fine for couple of days and it popped again and circuit breaker is triggered. Tv...

Re: New Members - please post your introductions here

Hi Im a medical doctor but like fiddling with electronics, came over here for a help in fixing my samssung plasma PSU.