Re: scematic asus 1025c
there is no schematic for Eee PC 1025c.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
-
-
-
Re: DELL LATITUDE E55OO password
You may try below:
a1a4gzhk
0p9jxql3
ln20Pvee4hy2nyoa
4hhllyse
ps. type in case sensitive...
Leave a comment:
-
-
Re: Is my soldering iron heating element bad?
Not need to recalibrate....
Leave a comment:
-
Re: What kind of resistor is that?
Simply, soldering a cable to each output (+) and GND, then please measure.
Usually the biggest cap is output....
Leave a comment:
-
Re: dell inspiron 1545 problem
hi hazim,
pin 1 and pin 2 start with 12.3v and still down to 8.5 v - 7.3 v- 2.5v - 0.9 v - finaly 0 volt (this in 10 second ) this indicate battery problem.
Leave a comment:
-
-
-
Re: HP G62-464TX Graphics Conversion help
hi subroto, have you the schematic, to convert this mobo from discrete to UMA you need the schematic to make convert process easier, so if you already have it:
after remove the ATI chip, locate and add following component:
- R310 (LVDS_BLON_IGPU)
- R309 (DISP_ON_IGPU)
- R311 (DPST_PWM_IGPU)
next, :
- RP9, RP3, RP5, RP7, RP1 (LVDS and EDID)
feel free to ask if you have any problem
and let me know, if it work.
Leave a comment:
-
Re: Toshiba c640d bios
it's short circuit.
without power ic, is it still short circuit?
first, make sure the short circuit is gone, if it still short circuit.
LID, I mean not the lid light, but a component that controlled lid to ec, usually 3 pin.
my tips: apply external power supply(no more than 3v) to the coil, with your finger find the component that heat up. then component that heat up is the problem that make a short circuit....
Leave a comment:
-
Re: Help dell n5050 npce795pa0dx problem
so, NPCE795PA0dX from market did'nt worked.
in the market where you buy it?
Leave a comment:
-
-
Re: List Of BGA compatibility
SLGZR => SLGZS tested on Quanta DAGM6BMB8F0 REV:F (Dell XPS 15 L501X).
Leave a comment:
-
Re: Toshiba c640d bios
what the resistance ?
what about LID....
Leave a comment:
No activity results to display
Show More
Leave a comment: