Re: VIALI V32LEDF 31.5in (80cm) full HD LCD TV- Slow Startup

HI Dick Barton, CapLeaker, and ReeceyBurger123.
The voltages of the 3 regulators are as follows
U2
1117B -> line 1 of the IC
33 632k -> line 2 of the IC
Pin 1 = 00.3
Pin 2 = 3.323
Pin 3 = 4.97

U5
1117B -> line 1 of the IC
33 632k -> line 2 of the IC
Pin 1 = 00.3
Pin 2 = 3.327
Pin 3 = 4.95

UT1
1117B -> line 1 of the IC
33 632k -> line 2 of the IC
Pin 1 = 00.3
Pin...

Re: VIALI V32LEDF 31.5in (80cm) full HD LCD TV- Slow Startup

Thanks very much to Dick Barton, CapLeaker, and ReeceyBurger123 for your suggestions.
I'll come back to you in a day or two with part number of U3 & U8 and results of heating with hairdryer, after i pull the back off the TV again. I'll have to drive to the nearest big town to get a can of Freezing areosol. Cheers and thanks.
Shane

HI Badcaps from Australia,
I have a VIALI V32LEDF 31.5in (80cm) full HD LCD TV, only 2 1/2 years old and has developed the problem of slow start up.
I turn on the TV at the mains power wall point and the TV panel power red light immediately comes on solid.
There is no response to pressing the standby/power-on button on the remote or on the side panel buttons. So it then takes up to 70mins before it will respond to the standby/power-on button and then the TV panel power red light changes to solid blue, but there is no video display or sound. It then takes anywhere from 3 hours...