Re: Dim Clock LCD on Jenn-Air wall oven

Thanks Bluto, I guess that it'll take brute force. Looking at the 1st picture - along the long sides you can see 3 lighter color plastic tabs. That is the circuit board itself protruding though slots in the plastic frame. There are 2 boards with the lower board containing the LCD and the upper board having the caps in question. The frame does flex some, but it certainly feel as though it would break before the tabs release. I guess that I could glue it back together after the repair (if I do break it). I just thought that someone here had...

Re: New Members - please post your introductions here

Hi - I'm PJ and I have signed up because I am looking for some knowledge that can help me repair my wife's gas stove. The LED display is so dim that it's hard to read. I have posted last week but received no replies. As I doing something wrong?

Re: Dim Clock LCD on Jenn-Air wall oven

Ok - I have a Kenmore gas range with a 316080102 control board. The display has been getting progressively less bright for the last year or so. Now it's really hard to even see what temperature settings and readings are. The clock display is really dim as well. Anyhow, I removed the control board and display to see what caps I would need to order and replace, but I found another problem. The board with the caps is kind of sitting in a frame atop the display board. I would need to remove the "cap" board from the frame to gain access...