Re: Tannoy Reveal 6D
In my case the digital board was causing some sort of short which caused no sound but my LED would go dim also.
I solved my issue by simply disconnecting the digital board as i never use the digital input anyway, and they're still fine to this day.
I would recommend starting by disconnecting that digital board first, put everything back together and turn them on again to see if it remedies the issue.
My original posts are on page 3 and 4 (with the default post amount setting per page.)...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Tannoy Reveal 6D
Thanks for the reply MidiBob!
Sorry for the late reply.
I've solved my issue in the most lazy way possible.
It was the digital board that was causing the LED not to light bright, and it is the board that is most affected by the brown gunk.
So I just did a lazy fix, and disconnected the Digital board as I never use it!
The LED lights brightly again, and the sound is perfect!
I'm not sure if I'll ever bother to clean that digital board, just really happy my Monitor is back...
Leave a comment:
-
Re: Tannoy Reveal 6D
Too small, 3rd time's the charm!
[url=https://img.ie/image/s2a][/url]
[url=https://img.ie/image/s2H][/url]
[url=https://img.ie/image/s2O][/url]
[url=https://img.ie/image/s2d][/url]Re: Tannoy Reveal 6D
Too small, 3rd time's the charm!
[url=https://img.ie/image/s2a][/url]
[url=https://img.ie/image/s2H][/url]
[url=https://img.ie/image/s2O][/url]
[url=https://img.ie/image/s2d][/url]Re: Tannoy Reveal 6D
Too small, 3rd time's the charm!
[url=https://img.ie/image/s2a][/url]...
Leave a comment:
-
Re: Tannoy Reveal 6D
Trying to upload multiple images from an ipad is never a good idea! Here they are:
[url=https://img.ie/image/s2a][/url] [url=https://img.ie/image/s2H][/url] [url=https://img.ie/image/s2O][/url] [url=https://img.ie/image/s2d][/url]Re: Tannoy Reveal 6D
Trying to upload multiple images from an ipad is never a good idea! Here they are:
[url=https://img.ie/image/s2a][/url] [url=https://img.ie/image/s2H][/url] [url=https://img.ie/image/s2O][/url] [url=https://img.ie/image/s2d][/url]Re: Tannoy Reveal 6D
Trying...
Leave a comment:
-
Re: Tannoy Reveal 6D
Thanks a lot for this thread Midibob!
I'm also embarking on my adventure to repair my Reveal 6D.
It was making crackling sounds every so often until one day it got worse and the power LED went off.
I'm wondering if you had to desolder any components to clean the brown glue underneath them i.e. Between the component and PCB?
If anyone has suggestions on how to tackle my board from the pics, i'd really appreciate it, especially on how to clean caps with brown glue on top, or if i should replace them....
Leave a comment:
No activity results to display
Show More
Leave a comment: