Anyone help with on this please?...

I have an Alienware 15 R3 that needs the BIOS password.

Service tag is CKC33M2
How do I get the motherboard number and backup bin?

Thanks

Re: Funai LF320FX4F Power Supply Issue?

I have the same model with the same issue (powers on for a fews seconds with logo then goes off). I checked power on the diodes mentioned on a previous post. With the main board unplugged I get 10 volts on the two left side diodes and 6.5 on the right side. When I plug the main board back up to the power supply and test while the TV is on for the few seconds both voltages double and drop out after the TV goes back off. I haven't pulled the caps to test yet but looks like all my diodes are working correctly.

Re: VX922 with FSP035-1PI01 PSU

I have this same board with a similiar problem. I replaced a few bad caps and my voltage steady out but the monitor would only flash on and off.

Re: Gateway 700G repair didn't take

After changing out all of the caps on the board my voltages leveled out. I reassembled everything and the monitor works great now! Thanks.

Re: Gateway 700G repair didn't take

My voltages are going up and down on my 5v and 12v outputs. I've order some new caps to replace all of them on the board. Let's hope that fixes it.

Re: Gateway 700G repair didn't take

I have the same board that I pulled out of a Emachines monitor that isn't working. I check my voltage ages and I'm getting 11.5v on the 12v and I'm getting 4.3 v on the 5v. I have one cap that is bulging but not blown yet. I found a replaced board for $34.95 online but I would rather try to repair it myself . Any Ideas?