glad to be a member

Re: Samsung LN32A330J1D - BN44-00191B No secondary No Standby Sort of

Well ..i used the same wire minus 1 turn for each coil in the same direction as the original.
The wire was fine only one coiil was corroded at the exit point where it was soldered . Beside my efforts winding was not perfectly alligned by hand
I guess this changed a bit the inductance.
I could not measure anything except continuity .

Re: Samsung LN32A330J1D - BN44-00191B No secondary No Standby Sort of

anyone?

Re: Samsung LN32A330J1D - BN44-00191B No secondary No Standby Sort of

The transformer rewinding photos...

Re: Samsung LN32A330J1D - BN44-00191B No secondary No Standby Sort of

I have a problem with a repaired same board .

It had a failure because of the brown glue shorting rm801 with qm801 and as a result RM801 WAS BURNED AND BOTH QM801 AND QM802 WAS SHORTED .
Also the transformer TM802 had one coil almost open because of the corrosion in one leg
I had to rewind the coils and properly solder the wire.
I replaced ICM801, RM801, QM801 ,QM802 and ZDTM801 KIA431A.
i have not replaced the pfc ic ICP801S (i am waiting to receive it).
The screen...