Re: Help for identify componenti on Samsung Power supply
i have this tv and i don't know why i find a lot of water under the power supply board. the result is that the part of the LED circuit doesn't work properly.
Some component and tracks are burn i want try to repair it.
But the TV service Manual haven't the scheme of the power supply and i didn't find it in other place
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Help for identify componenti on Samsung Power supply
Ho to everybody can anyone help me and explane what component is in photo? Thansk...
-
Re: Philips 32pfh4309/88 restart problem
I know the procedure, but i can't do it.because the TV restare before beginning the update...
Leave a comment:
-
Re: Philips 32pfh4309/88 restart problem
This Is the main board...Last edited by Bibu; 10-08-2019, 01:51 PM.
Leave a comment:
-
Re: Philips 32pfh4309/88 restart problem
I Just try to update the firmware with USB,but doesn't work... The tv restart before start the procedure...
Leave a comment:
-
Philips 32pfh4309/88 restart problem
Hi to everybody, i have a problem with the tv in title.
The tv reboot it self when i give power to It.
Sometimes show the Philips logo and restart, sometimes only the backlight on and off.
There isn't Power led on.
I opened the tv and i don't see any blow caps or burn PCB.
I read in other discussion about an upgrade firmware with USB, i just try It without success.the TV restart before start the upgrade.
I think that in my case Is an hardware problem, what i can check and what are the problems for you?
Thanks to everybody
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
Thanks budm, but id i disconnetto the ma in board, where the psu take the 5v to start the relay?...
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
With all connected at the two pin it the relay arrive 5v dc,this meaning that the some V is sending by the ssb. The old problem Was that the ssb didn't sent the 5v to the psu (One diode burn), this time is different
For forcing the psu what pin i must jumper?...
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
Sto the relay arrive 5v on the two pin, i must look better the ma in board, and search qhy arrive 5 volt in the standby...
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
And this is clear... But Why?...
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
I tested the voltage in the connector 1p11 when i ha e black screen and violet led:
8. +12VA= 0v
7. +5V2=5v
6. STANDBY=4v
5. BOOST=0v
4. GND=0v
3. LIGHT OM/OFF =1v
2. POWER GOOD =0v
1. DIM-CONTROL=0v
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
Today i check it.
But purple led what does it meaning? Is a protection mode?
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
after testing and retesting
now TV does not turn on , the relay does not click, and the blue LED TV has become purple , completely black screen
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
The mainboard code is: 310432853602...
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
UPDATE:
I try to update the firmware tv, but didn't solved the problem.
After some test, THE situation is this:
If i turni in the tv in Normal mode, i haven't any problem, THE tv stai in for hours.
If i turn the tv anD use an hdmi device the tv after minute a (randomly, without a specific timing) the tv beginnig to shut off and in by it self... I can se the monitor black, the led stay blue, relay click and the tv turn on... This in loop...
Sometimes i can see the relay...
Leave a comment:
-
Re: tv lcd Philips 42pfl9632d/10 Power board ko
Any suggestion for this new problem?
Leave a comment:
-
No activity results to display
Show More
Leave a comment: