Re: Vizio VL370M
does anyone know how to access the ribbon cable, the screen side on this model to try and reset the connections?...
Ericdombrosky@gmail.com
Member
Last Activity: 03-08-2016, 02:22 PM
Joined: 03-01-2016
Location: Orlando,fl
-
Re: Vizio VL370M
the main board...Leave a comment:
-
Re: Vizio VL370M
the used replacement...Leave a comment:
-
Re: Vizio VL370M
here's the old one...Leave a comment:
-
Re: Vizio VL370M
well the tv displays an different problem now, the old T-CON board seemed to had died. The screen only has backlight now. Replacment part came today, same problem. Any possible causes or suggestions? Not sure what else could make it seem like a T-CON issues, maybe bad main board? Where to start.Leave a comment:
-
Re: Vizio VL370M
Thank you for your suggestion Martino, freezing the t-con seems to directly effect the picture and fix it. I am willing to take the risk on trying a new t-con board and hopefully end up with a fully functional TV. I was about to trash it because nearly everywhere states that horizontal lines such as the ones pictured above can not be t-con related. But alas the board on this particular set is not next too anything else so it has to be at the very least a part of the problem. Ill let you all know when the part comes in.Leave a comment:
-
Re: Vizio VL370M
Ok so i finally got some cold spray. Started it up from hard reset, works perfect, warms up and starts acting up, spraying around and hit t con at one point, fixes it for a minute, cant replicate again on same reset cycle. Is it at all possible that t con board is causing the issues or the flex ribbon connecting it? If i leave it alone unplugged and go out tomorrow after it sat on hard reset the TV reliably works perfect for a minute or 2. Any thoughts?Leave a comment:
-
Re: Vizio VL370M
Is there a fix or is it worth fixing?Leave a comment:
-
Vizio VL370M
Hi I recently acquired a Vizio LCD TV model VL370M and when i unplug it to hard reset sometimes it works perfect. then shortly after it has rolling colored line horizontally. I would think its the T CON board except most common is vertical lines. Ive been told bad Lcd screen but why would it work perfect sometimes? Pressing on the screen does not change any look at all. I have takin pictures of the different behaviors and hope i can post them here. (new to all this) Just wondering where you guys would start with this thing or if its a junk screen. Thanks!... -
Re: New Members - please post your introductions here
Hi everyone I'm Eric from Orlando Florida, still a beginner in electronics but it has always fascinated me. I'm more on the looking for help side than can help at this time, but hopefully one day I will have more knowledge to share.Leave a comment:
No activity results to display
Leave a comment: