Re: Video fault on TX43LZD81

Thanks for your reply diif,

The T-con fuse seems OK it is the DTV 12v that I believe is at fault, can anyone give me the specs to replace this one please, there are no markings other than the printed CB lettering, PA7001/JS7065. Thanks in advance, Paul

Have submitted a post on previous thread but no response.
Fault on TX43LZD81
I have the same TV which presents the same problem. I have removed the back and tested the two fuses responsible for a no picture situation. We have no picture but do have sound and backlight. When I tested the fuse in your pics it reads a little over 14v the other one for the DTV 12v feed just to the right of the board connectors below the T-con board PA7001/JS7065 reads 0.01v but the one below (C7122) reads a little over 14v too. This TV is critical to my wife's viewing as she has an illness that prevents...

Re: Panasonic TX-32LZD80 backlight no picture (fixed)

Fault on TX43LZD81
I have the same TV which presents the same problem. I have removed the back and tested the two fuses responsible for a no picture situation. We have no picture but do have sound. When I tested the fuse in your pics it reads a little over 14v the other one for the 12v feed just to the right of the board connectors below the T-con board PA7001/JS7065 reads 0.01v but the one below (C7122) reads a little over 14v too. I saw the second one identified as faulty in the only YouTube video, it was not particularly...