Re: Samsung LE32R88BD/ BN44-00155A
Yeah i put whole metal housing with pads back on that t con board (not on picture), just fuse is outside on wires, same type as you using probably, with legs.
So thanks a lot for helping me out and saving some mom's money. Really great community here i'm still surprised. Have a good time....
darth
Member
Last Activity: 02-26-2016, 11:30 AM
Joined: 02-23-2016
Location: Prague
-
Re: Samsung LE32R88BD/ BN44-00155A
Got on it before while. I put there 3A bigger fuse on wires and picture is working, all seems good. Do you think its safe to assembly and it was only some one time accident that blown fuse?Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
Do you know how much amps fuse to get? Can't find in datasheet you provided.
Can i get to know before purchasing new t-con that isn't short circuit in panel itself?Last edited by darth; 02-24-2016, 04:29 PM.Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
So thats it? Just change fuse and could be good to go if there is no short as i measured resistance?
or short fuse.. donno how are correct words in english, maybe some bad part blow away and we'll see, that's how my old coworker made repairs in pulse power factory repair station
maybe too destructive in this situation, where i don't have infinite number of power units, but one tv
Last edited by darth; 02-24-2016, 04:12 PM.Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
seems more as i set meter if set on 200K it measuring 60K resistance, more if set to 2M. So no shortage on all three ends. Fuse is blown i see now also
Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
on a picture @budm posted, all ends 1.6V except F1 top end 5.2VLeave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
U guys are great and helpful.
So my measurements are 1.6V on three ends and 5.2V on F1 on closer to big chip end.Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
not good quality
...
Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
...Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
LE32RB86BDX-SPD as i'n first post.Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
I measured these two right under connector on image. Hope i'm on right place.
...Last edited by darth; 02-24-2016, 12:39 PM.Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
So even with t con disconnected there is same low voltage on fuses so problem must be on main. There is one FET near connector, should i try to change it only?
...Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
So there are two smd fuses above tcon cable which goes from main. On both end of both fuses is 5.26V in power on state.
Is there something known to causing this or there is need for replace main completely?Leave a comment:
-
Re: Samsung LE32R88BD/ BN44-00155A
Hi guys,
looking for some advice on fixing my mom's LE32RB86 LCD TV. It powers on, remote, backlight and sound works, but there is no picture just backlighted black, otherwise everything ok.
Unfortunately doesn't seems like standard caps power on problem.
Do you have some experience if it could be some parts, because whole boards seems so rare on that old tv.
Thanks for advice.Leave a comment:
No activity results to display
Leave a comment: