Re: Vizio E470VL "2 seconds to black"
Gotcha. Well thanks for the help. Looks like I'm just going to sell this one to someone who's willing to buy a main board for it.
burkewm
Member
Last Activity: 03-12-2016, 08:36 PM
Joined: 02-20-2016
Location: Newport News
-
Re: Vizio E470VL "2 seconds to black"
Yeah the other component in that kit fixes a different issue. Well that sucks, those are like $150. No other way to do component level troubleshooting on the main board?Leave a comment:
-
Re: Vizio E470VL "2 seconds to black"
I've replaced the eeprom already, no difference.Leave a comment:
-
Re: Vizio E470VL "2 seconds to black"
Ah...Leave a comment:
-
Re: Vizio E470VL "2 seconds to black"
Budm from what I see the panel buttons are on the main control board. Which cable should I unhook?
Mendez which LEDs are you talking about? Can you describe their location?Leave a comment:
-
Re: Vizio E470VL "2 seconds to black"
Pins 1-3: +5VSB
Pins 4-7: SGND
Pins 8-10: 12V
Pin 11: PS_ON
Pin 12: I-ON/OFF
Pin 13: LAMP
Pin 14: DIMLeave a comment:
-
Re: Vizio E470VL "2 seconds to black"
Pin 1, 2, 3: 5.12V each
Pins 4-7: 0.00V each
Pins 8, 9, 10: 12.25V each
Pin 11: 2.24V
Pin 12: 3.24V when logo is white and attempting to power up, 0.00V when amber
Pin 13: 0.05V when logo is white, 0.00V when amber
Pin 14: 3.24V for half second after logo is white then 2.92V until logo goes amber when it drops to 0.71VLeave a comment:
-
Re: Vizio E470VL "2 seconds to black"
Any ideas anyone? I'll try anything...Leave a comment:
-
Vizio E470VL "2 seconds to black"
Hello all. Have an E470VL that has a common problem with no resolution yet. When the power button is pressed on the side of the TV, it infinitely cycles in this manner: on with the front logo turning white and the white vizio logo displaying on the screen for about 2-3 seconds, then off and back to amber, rinse and repeat... When the power is pressed on the remote, however, it only power cycles once in this manner.
All 5v standbys are present with the power cord attached. When the power is pressed, all 12v pins also read correctly when the TV is attempting to power up. I have replaced... -
Re: New Members - please post your introductions here
Hi all. Bill here...Leave a comment:
No activity results to display
Leave a comment: