Re: Samsung PS64D8000 switch on problem help please
Ok problem solved, dry joint on SMPS for one of the transformers
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Samsung PS64D8000 switch on problem help please
I have a PS64D8000 that will not come out of standby
I begin by checking for Vs and I find 5vdc on it at all times (should be 217) This is present in both Standby and On.
Power off and I then put the meter on ohms and check for short from X & Y boards by measuring resistance between Vs test point and GND and disconnect the X board, no changes to resistance reading @50k, disconnect Y board and again no change so still at 50k.
From this I assume that the X and Y boards are not killing the Vs but to be sure I powered up with X&Y disconnected, now this...
-
Re: ReCap on a Monitor Audio RSW-12 Sub
Hi,
Am about to do this job on my own amp but rather than Panasonic caps I am thinking of using Rubycon but am unsure which would be the best type (series) to use.
Any advice gratefully received
Thanks
Leave a comment:
No activity results to display
Show More
Leave a comment: