Re: TC-P55GT30 6 blinks



I will recheck tonight...

Re: TC-P55GT30 6 blinks

Anyone?

Re: TC-P55GT30 6 blinks



I have checked all of the ribbon cables and parts under the heatsinks. All appears OK. I actually removed the heatsink to probe the FETs instead of probing through the silicon. None are shorted.

I did try the isolation procedure and still get 6 blinks. According to the manual, there is still a problem on the SC board....

Re: Panasonic tc-p55gt30



Good call, here's a link to the new thread: [URL="https://www.badcaps.net/forum/showthread.php?t=53054&highlight=tc-p55gt30"]TC-P55GT30 6 blinks[/URL]Re: Panasonic tc-p55gt30



Good call, here's a link to the new thread: [URL="https://www.badcaps.net/forum/showthread.php?t=53054&highlight=tc-p55gt30"]TC-P55GT30 6 blinks[/URL]...

I recently acquired a TC-P55GT30 with the 7 blink problem. After a bunch of online research, I learned a bunch of parts fail on the SC board causing 7 blinks so I purchased the repair kit from shopjimmy to fix it. After replacing all of the parts with the new kitted parts, I no longer get 7 blinks :-) but the bad news is I get 6 blinks instead :-( If I removed the SC20 ribbon cable, I get 8 blinks, which according to my research means a problem still exist on the SC board. I have looked for shorts, but I am not finding anything. Any suggestions besides buy a new SC board? I am not finding a ton...

Re: Panasonic tc-p55gt30

Hey All, my first post.
I recently aquired a TC-P55GT40 with the 7 blink problem. After a bunch of online research, I learned a bunch of parts fail on the SC board causing 7 blinks so I purchased the repair kit from shopjimmy to fix it. After replacing all of the parts with the new kitted parts, I no longer get 7 blinks :-) but the bad news is I get 6 blinks instead :-( If I removed the SC20 ribbon cable, I get 8 blinks, which accoding to my research means a problem still exist on the SC board. I have looked for shorts, but I am not finding anything....