Re: Samsung Plasma PS43D490 picture got tinted all over

well, some updates:
I replaced 2 boards (Thanks to Chris for those boards) : X-Board first - No change - Same picture tinted by red dots ..
but after replacing Y-Sus board - all back to normal !!!
So, apparently the problem was in the Y-board ...
Thank all Badcaps gurus for Help!

Re: Samsung Plasma PS43D490 picture got tinted all over



I attached a screenshot .....

Re: Samsung Plasma PS43D490 picture got tinted all over

Thanks..
You are right - its VSC - just misspelling ...

Re: Samsung Plasma PS43D490 picture got tinted all over

Fisrt of all - Thanks a lot for quick response ..
As for firwmware - the TV Set runs on the latest available FW for this specific model 1021,
that was released in 2012 .. so I can't upgrade to another one, there is no any new ..
Well, I am going to look for another X-main pcb in hope it might fix the issue.
What about to increase VS and VCS voltage a little? Might it be helpful?

Dear electronics Gurus,
I am looking for some advise that will help me to fix my Samsung plasma TV set Model PS43D490.
The issue started before several days ago with turning off the video output ((after cold start) to display while sound still worked properly (video/audio source is a satellite box connected by HDMI to tv set).
After powering-off and powering-on back video output showed back for some minutes and turned off again .. again .. and so several times until the TV set was probably heating up and everything goes work fine.
But before 2 day ago this issue stops...

Re: New Members - please post your introductions here

Hello all, My name is Michael. I am an IT professional, but have no lot of experience in electronics so I would like to get some help from the forum's members.
While looking for a solution for my issue I have found this forum very interesting to learn from ..
Hope, I will find some help here