Re: Gigabyte GA-7VTXE - Bad Caps

I replaced the 4 - 3300uf caps with 9 - 1500uf, both 1200uf for the agp and 2 bulged 330uf caps. After soldering in the new caps, all of the ones for the VCore & AGP that I replaced measure about 30 ohms (no charge/discharge indication as they should) with my dvm. ESR meter shows low resistance on all as well and the drains of the 2SK3405 mosfets also measure 30 ohms to ground.
I have gone over the board with my lighted magnifier multiple times to verify my soldering and to find the source of the problem. I am beginning to suspect that...