Re: Panasonic Viera GT55 Plasma
Yes screws have all been tightened accordingly thanks
Stal8080
Member
Last Activity: 01-18-2017, 01:03 PM
Joined: 02-04-2016
Location: Erie, PA
-
Re: Panasonic Viera GT55 Plasma
I love this TV and forum for that matter, it was professional calibrated so the blacks are black and colors just pop! So I'm holding on to her till bitter end...Leave a comment:
-
Re: Panasonic Viera GT55 Plasma
Moreno
Thanks so much for helping me troubleshoot this got the beeps on the board when metering for continuity. Ordered a new power supply board of eBay problem solved screen fixed thank you so muchLeave a comment:
-
Re: Panasonic Viera GT55 Plasma
It's the Panasonic Viera GT5530/31
It has two power supply boards:
A main one:
Power Supply N0AE6KL00005
Sub Board:
Sub Power Supply Unit N0AE6KL00009 (PS-317-F55)
Attached are my pics of the two boards....Leave a comment:
-
Re: Panasonic Viera GT55 Plasma
Appreciate the great advice. Actually have researched this site and asked for help before on this site and it has been much more helpful then go buy an OLED. I digress because I tell what this might lead to and I'm not that type of person so here are the facts:
Loud Pop and screen went black and no power. No blinkks on Red LED either I took back panel off and see no immediate sign on blown cap. So I'm basically looking for some advise as to where to start....Last edited by Stal8080; 01-08-2017, 08:52 PM.Leave a comment:
-
Panasonic Viera GT55 Plasma
Hello all tonight I was watching my beloved Packers when all of a sudden I was startled half to death with a loud pop coming from my screen. My panny completely black and I could not get it to turn back. I get absolutely nothing I've had the TV un plugged for over an hour plug back in and still nothing no LEDs blinking no sound nothing help! -
Re: Panasonic TC 55GT31 Horizontal Black Lines
[QUOTE=tw2005;631556][QUOTE=tw2005;631429]...... a comparision with the bad ribbon inserted to a known good one and using those tabs as markers for any evidence of misalignment..........
My bad sorry for misunderstanding....whole thing has got me frustrated and flustered. Anyways talked to PTS board is going back to them today.....good people there. I'll updated in a few days when I get board back. If that doesn't fix, might just part her out and move on
Re: Panasonic TC 55GT31 Horizontal Black Lines
...Leave a comment:
-
Re: Panasonic TC 55GT31 Horizontal Black Lines
Here is a comparison shoot. Make a reference line on ribbon having problem with...Last edited by Stal8080; 02-17-2016, 07:33 PM.Leave a comment:
-
Re: Panasonic TC 55GT31 Horizontal Black Lines
Here is another picture....kinda shows a side view....not the best but all I had was iPhone camera....Leave a comment:
-
Re: Panasonic TC 55GT31 Horizontal Black Lines
Here is a better pic showing tabs....is there a way to actually test ribbon with meter or something?...Last edited by Stal8080; 02-17-2016, 07:25 AM.Leave a comment:
-
Re: Panasonic TC 55GT31 Horizontal Black Lines
Another pic...Leave a comment:
-
Re: Panasonic TC 55GT31 Horizontal Black Lines
Yeah I'm not quite sure I know what to measure voltage going into SD board. Also no change to lines or pics what so ever when pressure on ribbon see pic of ribbon...Leave a comment:
-
Re: Panasonic TC 55GT31 Horizontal Black Lines
Sorry about pics and double post on mobileLast edited by Stal8080; 02-16-2016, 07:03 PM.Leave a comment:
-
Panasonic TC 55GT31 Horizontal Black Lines
Hello Again All,
My previous issue with this set was discussed in detail here:
[url]https://www.badcaps.net/forum/showthread.php?t=51990[/url]
So got my boards back from ModiusPTS. SD/SU boards checked out ok SC board was bad. Got everything hooked back up and few bars came across top portion of panel. Reseated a couple of the ribbons and got all but one section to go away. It's the second ribbon from top of set at least I think. Cleaned it and reseated probably 5-6 with minimal change at best. Not sure where to go here ribbon looks ok see pic, I guess I could... -
Re: Help Panny tc 55gt31 blinking led
OK I sent all the boards in for repair and it turns out only the Sc board was bad they are repairing that and sending the SU and SD boards back to me tomorrow. Honestly I'm terrified to plug them all in and turn them on to see what happens. If for some reason something is wrong with the SS board could that damage the SC board again?Leave a comment:
-
Re: Help Panny tc 55gt31 blinking led
Ok Decided to send SC boards to PTS. My question is should I send the SD/SU boards in as well. As I described when I used the shop jimmy kit on the SC board I got a perfect picture back for about 10 minutes which from what I read wouldn't have happened if the SD/SU boards got damaged. After I pulled SC board decided to pull SD/SU and check for shorts on those. All ribbon cable pins looked good. Just looking for advice to see if I should send them in as well just to be sure, thanks.Leave a comment:
-
Re: Help Panny tc 55gt31 blinking led
Thanks all.....need some advice again here:
Removed and Tested the SU/SD for shorts and everything checked out good.
So not sure where to go to here. All problems point to perhaps the SC board. Like previous posts when I installed the kit from SJ on the SC board I got the TV back, perfect picture for about 10 minutes before something on the SC board blew again. At this point, all I can think of is to buy a new kit but I'm sure that will result in same result. Is there a recommended forum member or site where I can...Leave a comment:
-
Re: Help Panny tc 55gt31 blinking led
First off thanks so much for the help. Really appreciate it. Few items for clarity sake.
Which board are you referring to here---The SC board??
So basically I should start over on the SC board === order another kit from SJ?
IN Addition to that check SU and SD have not shorted out?...Leave a comment:
-
Help Panny tc 55gt31 blinking led
Hello All,
I'm new here and aware there have been several issues in regards to the Panasonic Plasma and the blinking red light. Little back story....the other while watching it heard a faint popping sound and then tv went dark, followed by the infamous 7 LED blinks. Based off MY misunderstanding of trouble shooting steps and some misleading posts, I preceded removing the SC (5335BA) board and checking for shorts on that board. I had some of our engineers at work check for shorts on it and we found some on the transistors. So ordered the appropriate kit from shopjimmy and had them... -
Re: New Members - please post your introductions here
Hello All
I'm Brian from Erie, PA. My beloved Panny Plasma P55GT31 decided to give me the "blinks of death" now I've come here to help it find its way back to the beautiful, color-rich picture it once was.Leave a comment:
No activity results to display
Leave a comment: