Re: Sanyo DP50747-01 no video or sound??

Same issue as above except I cannot get above 2V on Vs and 1V on Va with or without P800.

Thoughts?

Re: Vizio JV50p - Turns on then clicks off - No audio or picture



This has been a very helpful discussion - thank you all.

I have replaced several caps (annotated in the attachment), when I plug the ac cord in, it seems like both relays are clicking at the same time. All voltages are good except Vs about 2V and Va around 0.7v.

Which caps should I look at now - if any? Is there another component I should be looking at? I have pulled both relays, tested them the reinstalled.

Thanks for the help!...