Re: BN44-00264A board reinstall question - black strip is off too

Hello martino and johnboy1313!
Thank you for the replies!
Is there any procedure you might be able to show me for how to disassemble the panel to get to the light tubes?
Even if you only have a rough guide to tell me from your memory, that would help greatly.
Thank you anyway.
Joe

Hi,
It looks like I improperly removed my BN44-00264A board.
I also removed the black strip to the right edge of the board.
I was supposed to pull the BN44-00264A board out of the black strip, but I took the black strip off too.
The black strip has a number of blocks that reach into the steel back wall and clip onto these wire like things.
Looks like this powers the lighting on the Samsung TV. Just a guess.
Well when I put the black strip back on, the clips don't clip, they just push the wires down a bit. They move.

Can someone please help...

Re: New Members - please post your introductions here

Hello everyone. My name is Joe. I have electronics experience I learned while in the Navy.
I have very little and crude tools, but I don't really use my electronics experience much these days.