Re: MSI PM8M-V 7104 won' post after cpu upgrade
Hey I got these 3 here I didn't mention,1500uf 16v HM(M) Ho6o1, they peg the needle on that meter pictured above....
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: MSI PM8M-V 7104 won' post after cpu upgrade
ok all the ones along the cpu,part of what I replaced are reading the same with the cpu that won't post,they read 0 on the every bottom red line that says dB.which cpu the one that works and will boot up into windows and they read +8 on the same line.check the OST's some are just above +12 and some are just below on the same red line dB.this is what I used set on 9v...
Leave a comment:
-
Re: MSI PM8M-V 7104 won' post after cpu upgrade
so in your opinion do you thing this might be my problem? why it only boots with one type of processor? I'm thinking it might be a voltage problem because this cpu takes 1.75v and the other ones run on low voltage.I did get it to boot once but it only registered as a 2.3 GHz (it's a 2.8) but when I turned it off it never booted again.I want to get this fix but I don't get any response from these websites that offer to fix it when I fill out my info.
Leave a comment:
-
MSI PM8M-V 7104 won' post after cpu upgrade
hi everybody,
new to this board and new to this concept of recapping.
anyway, I got this motherboard used,It came with a P4 1.8 cpu @400MHz and it works great everything seems fine,but when I upgrade to a 2.8 cpu @ 800 MHz it won't post.I've tried everything I can think of.even bought a new 600 watt PSU.there are a row of 5 caps along the cpu, 3 are the KZG 3,300uf 6.3v that I've been reading about on this board, one has a little bulg.that's why I think it's somethink electrical.any thoughts or ideals would be welcome because I would like to get it fixed and I'm not interested in...
No activity results to display
Show More
Leave a comment: