Re: Delta DPS-800GB Power Supply No Power



Thanks, I'm looking for them now. How do I find you on ebay?
Jack...

Re: Delta DPS-800GB Power Supply No Power



Okay, I'm back on this project after a LONG recess. I have done every thing you mentioned down to removing the finned spreader. Neither one of the heatsinks will budge. Is there needed component desoldering that you did not mention?...

Re: Delta DPS-800GB Power Supply comes on intermittendly

[QUOTE=261Jack;619662]T - My DPS-800GB turns on SOMETIMES - Pin 31 is connected to pin 34 - The fuse and fans are good - I replaced the two [large] 270 mF caps [nothing changed] - There is a click [I assume a relay] when the PS 'does' start - I see only one cap [c232] next to the daughter board.

More DPS-800GB prodding - - -
I have the PS completely out of its case and sitting on my work bench - Every time I apply power I hear a faint click - If it does start, there is a much louder click [I think from...

Re: Delta DPS-800GB Power Supply No Power



T - My DPS-800GB turns on SOMETIMES - Pin 31 is connected to pin 34 - The fuse and fans are good - I replaced the two [large] 270 mF caps [nothing changed] - There is a click [I assume a relay] when the PS 'does' start - I see only one cap [c232] next to the daughter board.

Your commits please, Jack...

Re: Delta DPS-800GB Power Supply No Power



T - My DPS-800GB turns on SOMETIMES - Pin 31 is connected to pin 34 - The fuse is good - I replaced the two [large] 270 mF caps - There is a click [I assume a relay] when the PS does start - I see only one cap [c232] next to the daughter board

Your commits please, Jack...