Re: Hanns-G HG281D, LCD Monitor no power



Through reading this very through and informative thread, i have replaced many of the Caps on my HG281D Power supply board (ive replaced about 18 caps on the PS board, the ones most commonly suggested/listed here to be replaced).

When i try to test the +5VSB as described above by PlainBill, (with only the AC main plugged to the power supply board, nothing else) [B] all 11 pins read the same, they all constantly fluctuate between ~ -.13 v dc and ~ +.30v dc [/B] (to verify, the way I take this reading: i set...