Re: Sceptre X22WG

"It's Alive!"

[url]https://www.badcaps.net/forum/attachment.php?attachmentid=14030&stc=1[/url]

I replaced seven caps on the power supply from the previous pictures. They did the trick. I haven't seen the monitor turn on in a while. About $5 in caps and a few hours of work, and it is fully operational again! I think the majority of time went to getting the case of the monitor open. The soldering was done in minutes. It should be easy since I am are IPC certified Doesn't get much easier than through hole boards. If...

Re: Sceptre X22WG

They are supposed to go back in the same spots? Lol

Yes, I did. Thank you.

Re: Sceptre X22WG

Sorry about that, I initially posted from my phone.

I have disassembled the monitor and removed the power supply card. The other thread with similar problems was a great help.

[url]https://www.badcaps.net/forum/showthread.php?t=8253&highlight=sceptre+x22wg[/url]

I checked the fuse, which was fine.

Here are the pictures of my board. With the old caps removed.

[url]https://www.badcaps.net/forum/attachment.php?attachmentid=13922&stc=1[/url]

I ordered new caps with...

I have a Sceptre X22WG that died. It no longer powers on. No LED in the front, no display on either of the video outputs. I looked and saw that I am not alone. I am guessing that I have a fault with the power supply, but I haven't cracked her open yet. For now I guess I will look at other threads and try to repair it as others have.

Any advice would be appreciated. Thanks!