Re: Sharp 70" LC-70LE734U : 1-1, 1 Slow - 1 Fast, Backlight Extravaganza!
@budwich
I can definitely give that a try, what will that be testing?
I did find another thread where a guy was having the exact same issue: a 1-1 error and unable to get into the service menu. Unfortunately, a follow up response was never posted.
[URL="https://www.badcaps.net/forum/showthread.php?t=49956&highlight=1-1"]https://www.badcaps.net/forum/showthread.php?t=49956&highlight=1-1[/URL]Re: Sharp 70" LC-70LE734U : 1-1, 1 Slow - 1 Fast,
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Sharp 70" LC-70LE734U : 1-1, 1 Slow - 1 Fast, Backlight Extravaganza!
I have a previous thread for this tv that relates to a 2-3(2 short, 3 long) error code that was fixed by replacing the main board:
[URL="https://www.badcaps.net/forum/showthread.php?t=59988&highlight=lc-70le734u"]https://www.badcaps.net/forum/showthread.php?t=59988&highlight=lc-70le734u[/URL]
I decided to restart this thread because I felt like the 1-1 error code is the most common for the Sharp 70 inchers, and the title of the previous thread doesn't reflect the 1-1 error code and might be overlooked by someone for whom the information contained in...Last edited by Inverted; 02-09-2017, 06:35 PM.
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Came up with another FM24S board to try. I immediately tried to go into service mode the first time I powered it on since someone has said that if it throws the 1-1 error 5 times the board is toast? Anyways, same thing happened, it had the solid light for eight seconds and then threw the 1-1 error again. So I guess I need to either take a look at the back lighting or just use vol+ and channel- to override the error and use the tv that way...
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
[B]PD[/B]
Pin, Vol, Name[list=1][*]12.2 : Pnl_12v[*]12.2 : Pnl_12v[*]0 : Sgnd[*]0 : Sgnd[*]13.43 : Ur13v[*]13.43 : Ur13v[*]13.43 : Ur13v[*]13.43 : Ur13v[*]0 : Sgnd[*]0 : Sgnd[*]0 : Sgnd[*]0 : Sgnd[*]3.32 : Ac_det[*]2.85 : Ps_on[*]5.06 : Bu+5v[*]3.27 : Pnl_pow[*]0 : Vsync[*]3.28 : Scl[*]1.98 : Nc[*]3.28 : Sda[*]0.4 : Ofl[*]3.29 : Error[*]0 : Nc[*]3.25 : Stb[/list]
This is the board that throws the 1-1 error, but that I can get the tv to turn on with by holding vol+ and channel-. If you scroll up to...
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
It has a reset under "initial setup" and "picture settings" in the menu. I've attempted to reset both of them. Under initial setup reset it asked for a 4 digit pin code from the prior user, which I didn't have, but I found a way to override that in the user manual. It basically just reset all the saved channels and whatnot.
I just threw the original main board back in, goes back to throwing the 2-3 error....
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
I actually updated the firmware yesterday in hopes that it would fix the issue. So how do I know that the issue doesn't still exist with my backlighting and that putting in a brand new board won't start throwing the 1-1 again?...
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Yep, I've tried Vol- and input while plugging in, as well as menu 4725, as well as menu 999,222. When I plug in the set normally it immediately goes to flashing 1-1. However, if I use Vol- and input while plugging it, it goes solid for 7-8 seconds, nothing comes on the screen, and then it flashes 1-1.
So I just tried menu 2489. What am I supposed to see happen? I hit menu on the remote and it obviously brings up the tv menu, then when I hit 2, it starts acting like I am entering a channel to go to, once I...Last edited by Inverted; 02-02-2017, 06:55 AM.
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
I made progress. I figured it was most likely the main board not allowing the 12v to come up, so I ordered a used main board. Now I get a 1-1 error code. Bypassing the error code with vol+ channel- I get the tv to start up. However, I've attempted several different methods of entering the service menu that I've found on this forum and none seem to work. I'd like to get into the service menu to attempt to reset the lamp error counter. Any ideas?...
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Is it an issue with the PD connector which runs to the main board, showing 0.3V on the ERROR pin?
If I jumper this to ground through a resistor, is there any potential harm in doing this?
If I do jumper it, can I do it after I power up the tv, or do I need to have the jumper in place before I power on the tv?
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
@dskall,
Yep, I've read it. In order to get the pinout readings from above I used the vol+ & ch- trick, this gives me a solid boomerang light instead of the 2 long, 3 short error code. I've also held the power button and caused the light to go off, but unlike the originator of that post, mine did not miraculously start working
I've also tried the vol- & input trick, but that does nothing for me.
Leave a comment:
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Fourth round of attachments.
[LIST=1][*]Main_Board_Back_TopLeft[*]Main_Board_Back_TopRight[*]Main_Board_Back_MiddleLeft[*]Main_Board_Back_MiddleRight[*]Main_Board_Back_BottomLeft[*]Main_Board_Back_BottomRight[/LIST]- Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Fourth round of attachments.
[LIST=1] - Main_Board_Back_TopLeft
- Main_Board_Back_TopRight
- Main_Board_Back_MiddleLeft
- Main_Board_Back_MiddleRight
- Main_Board_Back_BottomLeft
- Main_Board_Back_BottomRight[/LIST]
Last edited by Inverted; 01-29-2017, 06:36 PM.
Leave a comment:
- Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Third round of attachments.
[LIST=1][*]Main_Board_Front_TopLeft[*]Main_Board_Front_TopRight[*]Main_Board_Front_MiddleLeft[*]Main_Board_Front_MiddleRight[*]Main_Board_Front_BottomLeft[*]Main_Board_Front_BottomRight[/LIST]- Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Third round of attachments.
[LIST=1] - Main_Board_Front_TopLeft
- Main_Board_Front_TopRight
- Main_Board_Front_MiddleLeft
- Main_Board_Front_MiddleRight
- Main_Board_Front_BottomLeft
- Main_Board_Front_BottomRig
Last edited by Inverted; 01-29-2017, 06:21 PM.
Leave a comment:
- Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Second round of attachments.
[LIST=1][*]Power_Board_Front_Full_CameraFlash[*]Power_Board_Back_TopLeft[*]Power_Board_Back_TopRight[*]Power_Board_Back_MiddleLeft[*]Power_Board_Back_MiddleRight[*]Power_Board_Back_BottomLeft[*]Power_Board_Back_BottomRight[*]Address_Board_Front_Full[*]Power_Board_Back_Full[/LIST]- Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
Second round of attachments.
[LIST=1] - Power_Board_Front_Full_CameraFlash
- Power_Board_Back_TopLeft
- Power_Board_Back_T
Leave a comment:
- Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
-
Re: Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
First round of attachments.
I've named the images to tell which part of the board they represent. As an example, if we take Power_Board_Front_Top....this means that it is obviously the Power Board, it is the front side of the board, as well as just the top portion of the board.
If it was Power_Board_Front_TopLeft, it would mean that it is the front of the board, but only displaying the top left. There would then be 6 images that made up the entire front side of the power board....front left,...Last edited by Inverted; 01-29-2017, 05:17 PM.
Leave a comment:
-
Sharp 70" LC-70LE734U : No Picture : 2 Slow - 3 Fast
I took a chance and picked up this tv for $150 in the hopes that I can get it working and can upgrade my 55" plasma(which was also a tv I repaired). So let the games begin!
Anyways, I've read through all of the posts I could find on the 70" Sharp.
The blink code I am getting is 2 slow, 3 fast.
I am getting nothing on the screen, I've never been able to get any backlighting, not even a quick flash. Many times I've taken a flashlight to the screen, but I get nothing.
I have 2 ribbon cables that leave the TCON and go to the lcd. I've attempted...
No activity results to display
Show More
Leave a comment: