Re: Varistor for Bestec ATX0300 D5WC
Other pics...
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Varistor for Bestec ATX0300 D5WC
Update.
Changed my varistor to 200v
Found out that there is a fuse covered with black rubber that does not give a reading on the multimeter. That fix my problem. Thanks everyone....
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
Many thanks to all those who contributed to this thread...budm,fzabkar, Per Hansson and momaka.Greatly appreciated jt.
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
I just do some you-tubing and readings in the net.I know not much about this things but I like doing things on my own because of the self fullfilment aside from saving a lot of money. I got to have that multimeter and test those parts you mentioned momaka. Many thanks and more POWER💪
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
Thanks for the immediate reply momaka. If the varistor serves nothing in powering up my unit when it exploded...why can't it power up my Desktop?does this mean that there is more than the varistor that got messsed up?
So I need to remove that red varistor that i just put and check on the other parts?Last edited by docchan2000; 12-06-2015, 01:45 AM.
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
Here are the pictures. The red Varistor is the new one, it is a 100v varistor but I'm not sure if i should replace it with a 200v or 300v one. Thanks ...
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
Thanks for all your reply.I am new in this site and not quite familiar in posting.
Is it OK if I just put a 300v varistor there?I'm using this PSU for my HP desktop.I'll try to take some nice pictures tomorrow.
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
Here is the specs of my atx...
Leave a comment:
-
Re: Varistor for Bestec ATX0300 D5WC
Thanks for the reply. I don't know what voltage to put but it looks like this picture which I screen shot from hkqq2010....
Leave a comment:
-
Varistor for Bestec ATX0300 D5WC
I got a blown up varistor ( vr44) located bet the two big capacitors.I don't know what is the value of it or what voltage to replace it?.Pls.help. can I just put any varistor there like 100.v?
No activity results to display
Show More
Leave a comment: