Re: New Members - please post your introductions here

hi folks,
yes, another newbie joins the ranks.
a tale of woe? of course. I have 2 shuttle xpcs; one is alive and well, the other alas is dead. I did the shuttle 'paper clip' test, and the pwr supply is good [of course, I did this test AFTER buying a brand new pwr supply that didn't fix the problem]
anyway, way back when in grad school I fixed broken things, but that's when I had schematics.

for this shuttle, I am at a loss to where to go next.
I found badcaps by accident; a good accident....

Re: Shuttle XPC SD37P2 V2 Burnt Caps and MOSFET? - Please Help

folks,
I see this thread is a bit old, but let me try my question here.
1. I have the same shuttle xpc; it won't turn on
2. I did the shuttle 'paper clip' test: pull the pwr supply from the mobo, put a paper clip between the single green wire and one of the black wires.
3. the pwr supply fan engaged and so did the hdd - so the pwr supply is good

but, when I plug everything back as to operate, nothing turns on.
4. I scraped some of the insulation off the front panel 'power...