Re: 60" LG Plasma 60PA5500 (Sound but no Image)

My problem: LG 60PA6500 Powers on, No picture, with sound.
Just stopped working one day when I wasn't in the room to see what happened. It would turn on, and the buttons made the front standby LED flash, but no picture. Cycled through the inputs, which was hard with no screen, but finally got an input with sound.

$12 for a new upper buffer board, and 10 minutes of labor later... My picture is back!



I spent 10+ hours going through forums and youtube videos before reading Tom66's...

Re: 60" LG Plasma 60PA5500 (Sound but no Image)

Tom,

Wanted to see if you could give some insight. I tried what you said. Unscrewed the top left board, disconnected from the 3 white connecters, and disconnected the ribbon from the lower buffer board.

I did get something showing on the bottom half of the screen, but it was only colors, nothing you could make out.

Is that normal, or do I have a bigger problem than just the upper buffer board?

Also, on the nubs you mentioned. I only see 2 black nubs, one on the upper and one...