Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
if someone still need it in 2024, this is a K56CA UMA only dump taken from a working machine. all bioses posted on this thread are for k56cm or k56cb...
Leave a comment:
-
this is the original chrome os firmware, i am unsure if still useful tho...
Leave a comment:
-
-
Re: Canon Pixma MG2550S dump BIOS
24c08 dump from a working 2550s.
no idea how many copies it already printed, but with this i revived two wasted ink pad printers.
beware. it will change your s/n, i didn't ever tried to edit, i used a ch341 programmer to write the dump, just load and write, no need to erase
btw,rewriting 00ff on the eeprom as joepales said does nothing on my printers...
Leave a comment:
-
Re: Canon M2450S Dump
I tried with the 2450 without S and it doesn't work.
should the dump be done like this?...
Leave a comment:
-
Re: Someone friendly with BIOS Prodesk 400 G3 MS-7A02 v1.0
to enable bios recovery on this model:
prepare an usb key with the extracted bios from the official update
bios must be on \hewlett-packard\bios\current named both with original name (N03_0237.bin) and bios.bin
insert the usb key on a usb-2 port, power off the pc if not already
locate on the M/B the jumpers marked as BBR and short them, use a firm short,not a screwdriver, i soldered a wire.
power on and wait it reflash, when it turn off remove the short on BBR
do not attempt to flash a...
Leave a comment:
-
Re: Lenovo C50-30 bios dump needed, please!
found it myself, posting here becase this seem very hard to find...
Leave a comment:
-
Lenovo Aio c50-30 type F0B1 dump needed
hi all,i need a full dump bios+ec bios for this lenovo, i can find the bios here but not the EC
bios is 8mbit, ec is 1mbit
m/b type is 5B20H15287
thanks
-
Re: Lenovo C50-30 bios dump needed, please!
ec bios dump please?
tia
Leave a comment:
-
Re: Acer 5742G, PQ88 MOSFET blowing..
hi, cannot make new posts yet, so sorry if i use yours. i have a power off issue with this board, i'm pretty sure it is not cpu overheating.
even on a cold start it stay on 10/20 seconds then power off, no components on board seem to overheat, and it power off randomly, after 20 seconds, or even 10 minutes. pressing powerbutton it restart normally then power off again.
i have many broken spare boards of this kind (new70) where i can pull components. any suggestion on what i can try first?
Leave a comment:
No activity results to display
Show More
Leave a comment: