Re: RCA RLDED3258A-B Stuck in Standby
Hey guys i got my EEPROM in the mail today and put it in the TV, It works but was Upside down and the colors were wrong, I set the LVDS_BITMODE to 6 and it fixed the colors, But it's still upside down, I looked through all the menus but can't find an option to flip the screen.
jihadi_john1
Member
Last Activity: 01-18-2023, 03:01 AM
Joined: 10-15-2015
Location: Wallaceburg, Ontario
-
Re: RCA RLDED3258A-B Stuck in Standby
I contacted them and all they could say was they don't sell parts for my model of tvLeave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
My panel is an "HK315LEDM-MHV1H" and the EEPROM says it's for a "HK315LEDM-DH2LH"
So i assume that it's the same panel and that it would work.Leave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
I found 2 EEPROMs that i believe may work for this TV
[URL="http://www.shopjimmy.com/proscan-plded3273a-b-1206h1097a-main-board-u10-eeprom-only.htm"]http://www.shopjimmy.com/proscan-plded3273a-b-1206h1097a-main-board-u10-eeprom-only.htm[/URL]
This one is from the same model of TV just a different board
[URL="http://www.shopjimmy.com/haier-32d2000e-dh1tk4m0104m-main-board-uf1-eeprom-only.htm"]http://www.shopjimmy.com/haier-32d2000e-dh1tk4m0104m-main-board-uf1-eeprom-only.htm[/URL]
...Leave a comment:
-
Re: Sanyo 42" No Startup
Can we get some pictures of both sides of the power supply board?Leave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
If it's a case of a bad EEPROM, I could reprogram it(or not as it might be soft/hardware locked) but i would need to somehow find a firmware for it.Last edited by jihadi_john1; 10-07-2016, 01:36 PM.Leave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
I'm getting 18.92v on the LED out, And it doesn't change when i press the power button.Leave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
I tested the 1.15V_STB test point on the bottom of the board and got 1.15v
Also got 5v on the 5V_STB pointLeave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
Here's the picture you requested...Leave a comment:
-
Re: RCA RLDED3258A-B Stuck in Standby
I replaced the cap with the black stuff on it to no avail.Leave a comment:
-
RCA RLDED3258A-B Stuck in Standby
RLED3258A-B
I'm getting a standby light, But when i press the power button nothing happens.
It uses an all in one board TP.MS3393.P81
I'm getting 19V across the caps(the ones in the third image)
There is 5v going out to the IR board
Only thing strange i noticed was some type of black powdery substance around the top of one of the caps as pictured(cap with blue mark on it).
Sorry for bad quality photos, If you want a better photo of a specific area let me know.
Any help is appreciated.... -
Re: New Members - please post your introductions here
Hi, My names Hayden and I like to work on anything electronic, Everything from Phones to Laptop Motherboards
I've been working on electronics for 2 years now and have limited experience
I've been a lurker on Badcaps for over a year and a half now and i have to say i love the forums, There is so much information available here that it's almost overwhelming at times.
I want to thank every person who makes quality content on this Forum.Leave a comment:
No activity results to display
Leave a comment: