It does not open after contact with liquid. I cannot find the relevant area in the board image, the path is broken
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"image.png","data-attachmentid":3312344}[/ATTACH]It does not open after contact with liquid. I cannot find the relevant area in the board image, the path is broken
[ATTACH=JSON]{"data-align":"none","data-size":"full","title":"image.png","data-atta...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
LA-L911P liquid
-
hello,
no display can you help me
TP00117D
P/N:SL11B03796
GE4B0/GE5B0 NM-D011
GE5B0...
-
1660ti burnt mosfet
Hello, I have a gigbyte 1660ti graphics card. The same part is burned in both graphics cards. Does anyone know the code of this part?...
-
Re: ACER 515-56G (LA-K092P) Not Power
There is no voltage on pin1-2 of the PRB4 resistor, the resistor is OK
Leave a comment:
-
ACER 515-56G (LA-K092P) Not Power
Hello,
There is no voltage on pin4 of the PQB3 mosfet. When I skip 1-2-3 with pin5, the device turns on. Of course it's not charging.
pqb3 and pqb4 don't have any shorts
can you help me thanks...
-
Re: LA-D993P No power no charging
I haven't been able to fix the problem yet
There is a working motherboard. does it help fix the other
Leave a comment:
-
-
Re: LA-D993P No power no charging
I checked the coils, there is no low resistance or short circuit.
When the device was in its last working state, the battery was not plugged in and the non-original charger was connected
The PS_ID line goes in MEC1404. Could the mec 1404 be faulty? Due to fake chargerLast edited by tipoti; 10-10-2022, 10:22 AM.
Leave a comment:
-
Re: LA-D993P No power no charging
source (1-2-3) = 398 kΩ
gate (4) = 416 kΩ
drain (5-6-7-8) = 130kΩ
i tried the bios
Leave a comment:
-
Re: LA-D993P No power no charging
sorry
I typed wrong kΩ
[url]https://we.tl/t-cfstD6JZ3t[/url]Re: LA-D993P No power no charging<br...stD6JZ3t[/url]
Leave a comment:
-
Re: LA-D993P No power no charging
Vcc (pin #28) = 19.7 Voltage
REGN (pin # 24) = 6 Voltage
ACDET (pin # 6) ACOK ( = 2.7 Voltage
pin # 5) = 3.3 Voltage
ACDRV (pin # 4) = 25.8 Voltage
PQ306 diod mode : 0.465 /
source (1-2-3) & drain (5-6-7-8) = resistance mode :465 ohm
source (1-2-3) & gate (4) = resistance mode :611ohm
gate (4) & drain (5-6-7-8) = ---
PQ302 diod mode : 0.513 /
source (1-2-3) & drain (5-6-7-8) = resistance mode :513ohm
source (1-2-3) & gate (4) = resistance...
Leave a comment:
-
Re: LA-D993P No power no charging
it was working with non original charger. The battery was not installed. When I arrived in the morning, I noticed that the device was not turning on. I tried with another original charger and it still didn't turn on.
+3VALW ,+5VALW and power_sw 3 volts have
Leave a comment:
-
LA-D993P No power no charging
hello
When you press the power button, the light turns on and off. It was working normally until a day ago. +3VALW ,+5VALW and power_sw have 5 volts, won't charge and won't turn on
P65F
LA-D993P REV 1.0
-
Re: help me, Dell 7567 compal la-d993p 1.6v on power button
.Last edited by tipoti; 10-06-2022, 02:46 PM.
Leave a comment:
-
-
-
Re: Lenovo V330 INVALID SN AND UUİD NUMBER
i don't understand what should i do now
I guess the device doesn't boot in legacy mode because I didn't enter invalid ones
which program should i useLast edited by tipoti; 08-10-2021, 10:24 AM.
Leave a comment:
-
Re: Lenovo V330 INVALID SN AND UUİD NUMBER
( v330 yedek ) orijinal files...
Leave a comment:
-
Lenovo V330 INVALID SN AND UUİD NUMBER
hi,
i have lenovo v330, i tried many bios
device turns on but does not turn on when legacy
Is this problem because they don't have serial number and uuid numbers?
-
Re: HP ProOne 400 G2 20-inch Touch All-in-One PC bios
orijinal bios no image
can you help me...
Leave a comment:
No activity results to display
Show More
Leave a comment: