thanks RJ i took the power supply off and as you say the solder was all burnt off and wire was loose. I cleaned carbon off, soldered tried it and tv is working
wayneb
Member
Last Activity: 12-06-2018, 01:40 PM
Joined: 10-11-2015
Location: Birmingham
-
Re: JMB tv wont turn on MP3618-V50 burnt wire
thanks RJ i took the power supply off and as you say the solder was all burnt off and wire was loose. I cleaned carbon off, soldered tried it and tv is working
-
JMB tv wont turn on MP3618-V50 burnt wire
Hello i have a JMB 50/204I-GB-5B-FHKUP-UK, apparently it made a bang and they could smell burning. Stand by light comes on but when you press power goes off then comes back on again.
I assumed it was a cap on the power supply as ive repaired 2 tvs by doing this before with help from this forum.
As you can see i found a burnt wire and all caps look fine.
Ive found some replacement boards on ebay but wanted to know if i could repair it myself for cheaper?
... -
Hitachi 32HXC01U A backlight problem
I need some help to fix this tv, when you turn it on the backlight comes on for a split second then goes off and stays off. When I shine a light you can see the picture and the sound works too. I fixed 2 tvs before with help from this forum but they were both to do with the psu and involved soldering a couple new caps in. Seems like this is the inverter board? but im not sure where it is. ive taken some pics and im wondering if its that small board under the psu?... -
Re: New Members - please post your introductions here
hey guys my names wayne from uk and i recently repaired my tv by replacing the psu which i learned from a thread on this forum. Now i have another tv but the symptoms are different and i need some help
Leave a comment:
No activity results to display
Leave a comment: