Re: Panasonic TCP54V10 7 blinks
That would put you west of our west coast
I'll do some more research and let you know how it works out.
Thanks for your help!
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TCP54V10 7 blinks
I'm on the east coast. Ever heard of or had experience with these guys?
[url]http://m.ebay.com/itm/REPAIR-SERVICE-for-PANASONIC-SC-BOARD-TNPA4844-AD-TC-P42S1-/131595943781?nav=SEARCH[/url]Re: Panasonic TCP54V10 7 blinks<br /...v=SEARCH[/url]
Leave a comment:
-
Re: Panasonic TCP54V10 7 blinks
That's what I was afraid of.
I'll let you know if I'm able to get it going again.
Leave a comment:
-
Re: Panasonic TCP54V10 7 blinks
Tw2005, thanks for the reply.
So the high resistance numbers dont mean anything on su and sd?
I tried using a jumper from an ide drive but it would not fit so I tried some tin foil. Would that work as a jumper?
Doing the above it continued with 7 blinks. Assuming it is the sc, any suggestions on where to find one?
They seem to be out of stock at many places.
Thanks for your time
Leave a comment:
-
Panasonic TCP54V10 7 blinks
As the title says, I have a Panasonic TC-P54V10 with 7 blinks.
I have done some resistance testing on the sc, su and sd boards.
The sc tests good but the su and sd boards test higher (5.5 vs 2.1)? Manual says lower is bad but nothing about if they test higher.
Thoughts on what this could mean and next steps are appreciated.
I have built some pc's but have zero electronics knowledge.
Thanks in advance for your help.
No activity results to display
Show More
Leave a comment: