G533-6050A3250203-MB-A01
Do you have it?...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Schematic for Acer A314-35 DA0Z8YMB8F0-Z8Y
Thank you Bro.
Leave a comment:
-
Schematic for Acer A314-35 DA0Z8YMB8F0-Z8Y
Hello anyone has a schematic for Acer A314-35
DA0Z8YMB8F0-Z8Y ?
-
-
Razer Blade 14 2017 Blank
Hi,
Razer Blade 14 2017
i7-7700 GTX 1060
Model: RZ09-01953E72
Laptop display blank, when pressing the power button only green light slowly blinking.
Anyone ever repaired this unit ?
Tried Flashing the BIOS no effect.
Clean ME the BIOS and flashed also no effect.
Anyone ?
-
Asus X441UV Rev 2.1 Boardview anyone ?
Hello, anyone has ASUS X441UV Rev 2.1 Boardview ?
I do have X441UV boardview but it is for rev 2.0 and its different.
I need Rev 2.1 boardview.
-
EC dump HP Envy 14 DAY31AMB6CO Rev C please?
Hi, I need EC dump HP Envy 14 mb code: DAY31AMB6C0 Rev C anyone ?
Leave a comment:
-
Re: cleanme bios hp 14-u211TX DAY31AMB6C0 rev.C, please
I need EC dump for DAY31AMB6CO Rev C, please?
Leave a comment:
-
Lenovo Thinkpad X230 can not turn on
Hi, anyone ever experience the Lenovo X230 cannot turn on ?
Motherboard code: LDB-2
When pressed the power button turn on for 3 second and then turn off.Last edited by sparrow2719; 01-13-2019, 12:22 PM.
-
Missing VCCSA lenovo ideapad 300-15isk
Hi, motherboard code:
BMWQ1 BMWQ2 NM-A481
Rev 1.0
When plugged in the charger, the power light instantly ON, no fan spinning, battery RTC connected and good.
The on off button not responsive at all, must be pressed about 10 seconds or more and then the power light just blink a little, the fan just move a little bit and stop...and nothing. Measurred ONOFF# pin=3.3v on power button board and it goes to 0v when pressed.
No vcc core at all
No vccsa
nvidia core is ok
1.8v alw is ok
1v alw is ok
1.35v ddr...
-
Re: List of pin compatible Laptop ICs
Does anyone know if IT 8586E can be replaced with IT 8587E ?
Leave a comment:
-
-
Re: Fujitsu Lifebook TH700 bios dump ?
Tried flash both 1M and second clean me bios but still no changes,
then I made myself a clean me bios using the first image from user, flashed it again and now it becomes better 2 minutes......curious about that i update it again using the bios update from fujitsu site, flash the ec 1mb (wrong moves) and it boot up fast,,,it comes up with error something related to:
microcode not updated for the booting processor
microcode not updated for the second alternate processor
...
Leave a comment:
-
Re: Fujitsu Lifebook TH700 bios dump ?
Will do and report back, thanks for suggestions.
BTW, happy New Year 2019...
Leave a comment:
-
Re: Fujitsu Lifebook TH700 bios dump ?
I am using a service power supply capable of 10A. Using toshiba charger 4.7A was just the same. No hdd attached nor the dvd.
It tooks more than 5 minutes just to shows the Fujitsu logo...damn.
Just like the old engine had the long time to start-up...
Leave a comment:
-
Fujitsu Lifebook TH700 3 blinks and tooks long time to boot
Hi, I have a fujitsu TH700 with these problem:
When powered on, the 3 lights on the panel blinking, no fan spinning, no boot and it took about 0.6A. If we just let it be......it will try restarting itself 2 or times with the same result 3 lights blink.
After a while the current will be 1.2A and it will restarting once again and it boot up!.....display comes up.
This happen on both the default bios it came with and the clear me bios provided (I have just tried to flash the clear me bios+ec from another thread)
It tooks 5 or more minutes...
-
Re: Fujitsu Lifebook TH700 bios dump ?
Flashed both 4M + 1M ec, just the same result.
When powered on, the 3 lights on the panel blinking, no fan spinning, no boot and it took about 0.6A.
If we just let it be......it will try restarting itself 2 or times with the same result 3 lights blink.
After a while the current will be 1.2A and it will restarting once again and it boot up!.....display comes up.
This happen on both the default bios it came with and the clear me bios provided.
But it tooks 5 or more minutes...
Leave a comment:
No activity results to display
Show More
Leave a comment: