Re: Vizio E421VA - no picture
[QUOTE=cypress123;1019699]Sorry for not responding to the reply, guess I had been watching TV, but now the same problem returns.
and now I don't remember what the fix wasRe: Vizio E421VA - no picture
[QUOTE=cypress123;1019699]Sorry for not responding to the reply, guess I had been watching TV, but now the same problem returns.
and now I don't remember what the fix wasRe: Vizio E421VA - no picture
[QUOTE=cypress123;1019699]Sorry for not responding to the reply, guess I had been watching TV,
cypress123
Cypress
Last Activity: 03-14-2021, 09:17 AM
Joined: 10-01-2015
Location: Cypress, Tx
-
Re: Vizio E421VA - no picture
Sorry for not responding to the reply, guess I had been watching TV, but now the same problem returns. FB4401 was blown, with that fixed, I watched tv for about 6 yrs.
now reparing the blown fuse it just shorts the 12v to gnd, like 2 ohms or less - and it is not from my repair, no solder bridges there.
any suggestion what it could be ? ?Leave a comment:
-
Re: Quick Nautical Equipment - SBC 500 FR ADV PLUS - Shorted Output Error E1
were the fuses checkedLeave a comment:
-
Philips 50PFP5332D/37
The unit is dead, except for the front panel blue led responding normally to power on and off (no flashing) - all bulging caps on the power supply have been replaced with correct parts from Digikey - Chassis is EJ3.OU PA
measurements taken standby On (with blue front panel led on)
VSND_pos 19.1 19.1
VSND_neg 15.3 15.3
12VAL 0 13.3
POWER_OK .1 .1
LIGHT_ON .2 .2
Standby 4.8 0
12VSSB 0 ... -
Re: Vizio E421VA - no picture
Got mine fixed, advise if you have a similar issue - if anyone reads thisLeave a comment:
-
Re: Vizio E421VA - no picture
continuing to probe - I have 0V on FB4401 - I had thought the 12V was the same and didn't check FB4401Leave a comment:
-
Re: Vizio E421VA - no picture
Has any one tried the EEPROM for this problem ? I have one with the same issues also, I tried another T-con - no changeLeave a comment:
No activity results to display
Leave a comment: