Re: TC-P60S30 lightning damage
sgeorge
Your where 100% correct. Installed the "correct suffix" main board and the TV works! Thank you for your support to get this fixed, and everyone else whom help with this!
will00771
Member
Last Activity: 10-22-2015, 03:55 PM
Joined: 09-24-2015
Location: Tampa, Fl
-
Re: TC-P60S30 lightning damage
The main board was for a 50" TV that i tried in the TV which gave me the picture earlier in the thread, but I did send it back. I ordered another "expensive" one of shop jimmy. I hope you are right about being a main board they just don't make plasma's like they used to...Leave a comment:
-
Re: TC-P60S30 lightning damage
The Caps check good on both boards. Other than trying to source the correct main board, is there anything else I can check?Leave a comment:
-
Re: TC-P60S30 lightning damage
Board 1 has 111VDC with 210VDC coming in.
Board 2 (above the main board) has 101VDC with 210VDC coming in.
All three Caps match each other on their board
//SEE ATTACHED//...Leave a comment:
-
Re: TC-P60S30 lightning damage
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTaZFBMOUhBaS14TTA/view?usp=sharing[/url]
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTaQXB0UXAxcDMtRG8/view?usp=sharing[/url]
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTaZGxRNXRHTmNFVG8/view?usp=sharing[/url]
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTaLTk1RFFnS1RBSm8/view?usp=sharing[/url]
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTaZ2JkWW5TbWpVUEk/view?usp=sharing[/url]
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTaUEFoakNWM0tXd3M/view?usp=sharing[/url]...Leave a comment:
-
Re: TC-P60S30 lightning damage
SU and SS pictures attached....Leave a comment:
-
Re: TC-P60S30 lightning damage
With the lightning damage I have a challenge... Is there a schematic available somewhere i can make voltage reading from the power supply connectors?
Variables.
-Wrong Main Board, from the 50" model. Contacted seller to request a swap out if available
--Original (bad) part re-installed.
-All original parts installed and connections made. Without the Part #AC suffix main board, TV will not even turn on or give me a LED blink code.
-Also have another main power supply card on hand, it would...Leave a comment:
-
Re: TC-P60S30 lightning damage
I have cropped the 2 main boards i have. My bad one (original) has 2 components in the suffix, far left hand side before the punch holes and dots. The new board only has 1 component and does not have the one on top. See attached....Leave a comment:
-
Re: TC-P60S30 lightning damage
I tested for standby power and had it, so i determined the main board was bad following a youtube how to. I received another board with the same part # from amazon. Everything is connected. At first i thought i had a PS problem. I disconnected and removed it, but my replacement part was bad (PS). I re-installed the original and now i am where i am at today.
I think I may have the wrong revision of main board. On the suffix there is a component on the top left and corner on my old board. My replacement board does not have one not sure...Leave a comment:
-
TC-P60S30 lightning damage
Make Panasonic Model TC-P60S30
Lightning took out the xbox 1 and the TV. Tampa is indeed the lightning capital of North America
First it would not turn on. Replaced the main board, now the TV looks like //SEE ATTACHED//
I am thinking I am at a loss and the panel is gone "see burned areas that are different than the box's and distortion." Let me know what you guys think
[url]https://drive.google.com/file/d/0B0LZLQJ0uaTab2txc2lZVmJ1d3M/view?usp=sharing[/url]https://Make Panasonic Model TC-P60S... 1 and the TV. -
Re: New Members - please post your introductions here
Hello. Found this site while trying to T/S a Panasonic TC-P60S30 that suffered a lighting strike. "near the house, did not actually hit the TV. I work on avionic's for my job so I do have some electronic principle knowledge, just do not know how the boards on TV's interface.
-WillLeave a comment:
No activity results to display
Leave a comment: