Hello, sorry for the delay
i haven't checked my transistor i will do this weekend so i hope i can find a similar one.Thanks...
dunkel
New Member
Last Activity: 11-06-2015, 03:28 PM
Joined: 09-13-2015
Location: tamaulipas
-
Re: Wine Fridge Power Board
Hello, sorry for the delay i haven't checked my transistor i will do this weekend so i hope i can find a similar one.
Thanks... -
Re: Wine Fridge Power Board
OK, let me remove the transistor to check the BCE or ECB and also my D12 to realize the D10.
did you see my picture I dont have TO92, nor even the empty space for it. thanks...Leave a comment:
-
Re: Wine Fridge Power Board
This is my IC3...Leave a comment:
-
Re: Wine Fridge Power Board
Hello, I cant find any TO92.
and I think the resistance in the emitter of T7 is my R36
R35 goes to the Base )having in mind this transistor is like the BUL39Q i think i found as replacement but I also wanted to know if i can change it to MJE13007 because on the same thread i found i can use both but now im not sure....Leave a comment:
-
Re: Wine Fridge Power Board
according my resistors and the pictures, i get this:
R34 10ohms 5%
R35 2ohms 5%
R36 2.7kohms 5%
R35 = R38
R34 = R37
R36 = R39Last edited by dunkel; 09-19-2015, 08:41 AM.Leave a comment:
-
Re: Wine Fridge Power Board
Thank you so much, now i just need to find out the value of the D12 diode which i have in good conditions.
do you know a replacement for the transistors 13005D ? T6, T7? can I use the MJE13007 ?
Thanks!...Last edited by dunkel; 09-19-2015, 08:41 AM.Leave a comment:
-
Re: Wine Fridge Power Board
Hello, I am having problems with this board, some components are totally burnt and i would like to know the specs of them, can you guys help me? the components are:
L1
R34
R35
R36
D10
Thanks in advanceLeave a comment:
No activity results to display
Leave a comment: