Re: Samsung ue49mu6120
Problem solved. I have put in a new main board and everything works fine.
Thanks for all the help and interest shown Lotas.
Thank you...
Alberto
Member
Last Activity: 03-13-2025, 03:22 PM
Joined: 09-13-2015
Location: España
-
-
Re: Samsung ue49mu6120
tested and with this file it gives standby slow flashes...Leave a comment:
-
Re: Samsung ue49mu6120
i tried with a new w25q40 chip and same problem.
convinced that the problem is the firmware because there is no response signal on 25q40 with oscilloscope...Leave a comment:
-
Re: Samsung ue49mu6120
do you have the firmware to test the 25q80 and the 24c512?
It is the last test that I have left to do, I am desperate.
Before reprogramming the 25q40 chip it did not do anything completely dead and when reprogramming it there is standby and it blinks but no image or backlight.
Thank you very much for your time and dedication, I am very grateful...Leave a comment:
-
Re: Samsung ue49mu6120
we have tried with a main board from another television and everything works correctly, so we believe it is a firmware problem of this board.
the memory has been removed with a jbc RMSE-2QF station and all the components are perfect around it.
I don't know if you can guide me further.
thank you...Leave a comment:
-
Re: Samsung ue49mu6120
good afternoon again
Tried again and it still doesn't work. standby light on but nothing on the image.
The file that I send you is the original of the television.
any help to put with a good file
thanks thanks...Leave a comment:
-
Re: Samsung ue49mu6120
correct is the same as the one in post #167, it is the original TV defects.
I try again and confirm
thank you...Leave a comment:
-
Re: Samsung ue49mu6120
The file sent by the original extracted from the television with RT809H there is no doubt.
I hope you can help me
thank you...Last edited by Alberto; 02-27-2023, 08:01 AM.Leave a comment:
-
Re: Samsung ue49mu6120
Now the standby light is on and it blinks when you press the power button but it does not show any image. The heatsink chip gets very hot.
I hope your help
thank youLeave a comment:
-
Re: Samsung ue49mu6120
Sorry but I don't know how to do it (0x88, 0x42), I have a RT809H programmer.
Could you help me do it?
thank you...Leave a comment:
-
Re: Samsung ue49mu6120
Good morning
I've tried the file but unfortunately it doesn't work, I don't have standby, the TV is completely dead.
any help please?
thank you so much...Leave a comment:
-
Re: Samsung ue49mu6120
thanks a lot
I'll try it on Monday and report the results.Leave a comment:
-
Re: Samsung ue49mu6120
Good morning
I would greatly appreciate your help to repair this file from a Samsung UE49MU6105K, it doesn't turn on anything, not even standby
thank you so much...Leave a comment:
-
Re: Dump acer aspire A515-54-37SH
good morning:
After trying the new file, it still has the same problem.
It does not show an image and after 15 seconds the blue power led turns off.
thank you...Leave a comment:
-
Re: Dump acer aspire A515-54-37SH
Good afternoon.
I am attaching the damaged original file.
Thanks a lot...Leave a comment:
-
Re: Dump acer aspire A515-54-37SH
thank you
but unfortunately, I still have the same problem.
It does not give an image and after 15 seconds the blue power light goes off.
Thank youLeave a comment:
-
Dump acer aspire A515-54-37SH
Hello;
I need to please dump bios for:
acer aspire A515-54-37SH
S/N:NXHFNEB0099231DBBC7600
INTEL I3 GPU INTEL
DA0ZAWMB8E0 REV:E
THANK YOULast edited by Alberto; 01-24-2023, 06:28 AM.
No activity results to display
Leave a comment: