Re: Samsung UN65F6300 won't power on (sometimes)
Mid 2014, but I did a new software update about a month ago.
BUT why won't the OTT box reconize the new P-series Vizio TV?
Superman_006
Member
Last Activity: 09-11-2015, 06:17 AM
Joined: 09-07-2015
Location: WV
-
Re: Samsung UN65F6300 won't power on (sometimes)
The STB input on the smart TV is supposed to become interactive with all the "set top boxes" , even supposed to pop up in the smart hub and transfer the guide onto the TV's guide and use the TV remote and not us the IR for the box at all. Maybe a little too smart or confused having an android box on there
I don't know which one is my firmware and which one is my software... But it's showing 2210 and "T-MST12AKUC-2210.1" as the versionLeave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
On the TV , HDMI 1 is in yellow and says "STB". I plugged the OTT into HDMI 2 which says (ARC). Works normalLeave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
I think the cec part of the HDMI from the OTT box is telling my TV to turn-off . The TV isn't turning all the way off, the red light flickers when the TV is on when I press any button on the remote. Samsung's CEC is called anynet under menu--system-- anynet --- off. I turned mine off but still anytime I turn the OTT box off, (even if I turn it back on) the TV backlight is off but pin 14 still has 3v on it until I unplug the HDMI cord... Then pin 14 drops straight to .25v
Pin 14 I'm getting .25v off and 3.32v consistatly...Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
Ok... While hooked up to the hdmi..OTT box on TV works on/off/on/off
Still hooked up OTT box ----POWER OFF.... Turn TV off, red light stays off and only flickers when i try to power on. Grd-pin 14 has 3v in this status. I unplug HDMI, push power, 5 red flashes and TV is back to normal.
I did this 4 times to simulate, each time it locks the TV up. Any explanations or fixes?Last edited by Superman_006; 09-08-2015, 11:56 PM.Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
I have 0.25vdc between 14-Gnd when off and 5v 12-grn when on.
Idk if this has anything to do with it but I also have a Vizio P-series TV, I wanted to watch a movie so I've hooked up my OTT MXQ TV box (which I've had for about a week) to the Vizio and it shows "no signal".... Same hdmi cable to a blueray works. On the Samsung I had it routed thru a Sony a/v reciever that has HDMI pass-thru. So I thought I would test the OTT box straight into the Samsung ... I wouldn't power on, I unplugged the hdmi and the red...Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
12(+) and 14(-) ... I have 5vdc when the TV is off and 2vdc when it's on
"With TV able to turn on"Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
With the TV working
On the ribbon going to the video card ... Using the 3rd one down as ground... Top 2 i get ~13VDC and the bottom 2 I get ~5VDC with the TV on, I don't get anything with the TV off
On the hot side of the board there is a transformer that says 94v-0�� With the TV on the meter is just going all over the place
Should i unplug the plug going to the video and still see if the backlights come on?Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
Well ... I spent about 30 mins trying to get it to come on. Red light would only flicker when I pushed the power button. I took it off the wall and put the mount on it. I realized this thing on the back wasn't a speaker (power/toggle). I pushed the power once I had it on my counter.... The red light flashed 5 times... Then powered on and then it's back to working.
Sorry for the photo being upside down, idk how I did that...Last edited by Superman_006; 09-08-2015, 07:54 PM.Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
Where do I test the voltages?Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
My TV has no buttons and only 2 boards in it. I think the other ones has all the brains on it. I tried to attach the photo of the power board to this post in a thumbnail...Leave a comment:
-
Re: Samsung UN65F6300 won't power on (sometimes)
The caps I pulled out and checked with a meter then put them back in are in the lower right corner of this board around the longest heat sink that's aluminum in color .
[URL=http://s130.photobucket.com/user/superman_006/media/Mobile%20Uploads/image_zpsy14h0kbs.jpg.html][/URL]Re: Samsung UN65F6300 won't power on (sometimes)
The caps I pulled out and checked with a meter then put them back in are in the lower right corner of this board around the longest heat sink that's aluminum in color .
Leave a comment:
-
Samsung UN65F6300 won't power on (sometimes)
I have a Samsung 65" LED smart TV, it never resets, or just powers off. Some days it just won't come on. There is a little red light on the bottom of the TV, if it's on ... The TV will power up like normal, if it's not the light does nothing or it blinks when I push the power button. Sometimes after I've tried to turn it on.... It will pop up 5 mins later. But once the TV is warm it seems to power on/off easy
I've taken the power board out (BN44-00614a) my version has the tall capacitors laying on their side, all the caps look normal and Samsung has went with 25v 390uf (x3)... -
Re: New Members - please post your introductions here
Hello, I'm always working on electronics and I have a Samsung smart led TV I've got some questions about.Leave a comment:
No activity results to display
Leave a comment: