Re: Lg oled65e6p-u.buswljr
After much trouble shooting and with the help of Diah, we finally got TV working. It ended up being the main board. See attached photos....
rplewis
Senior Member
Last Activity: 06-03-2021, 05:52 AM
Joined: 09-06-2015
Location: Wilmington, NC
-
Re: Lg oled65e6p-u.buswljr
Fuses check good....Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
Jumped everything like first time. Got 24 volts on 24 volt socket and 12 volts on the 12 volt socket. Nothing on the screen....Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
Are you refreshing your screen or do you get notification when I respond?Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
No... screen totally blank.Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
Started in STB when I plugged in. Powered on with P-only on SRC. Heard the relay on PS but no lights on main board. Not in STB since I pressed P-Only on SRC....Last edited by rplewis; 01-29-2021, 04:53 PM.Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
I do have 24 volts on main board socket. The T-Con board looks to be the same as the original. All numbers are exactly the same....Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
plugged in wall.. TV went to STB. With original remote I pressed power button, heard relay on PS but no light on main board or 24 volt on 24 volt socket. I do have 12 volts on 12 volt socket and correct voltages on the PS to main board plugs....Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
OK... replaced T-CON exactly as you state... LOL.
Waiting on next step....Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
Sorry about the confusion. If you think I should try to do things again with original boards, I can and will. I'm not sure what I missing....LOL. I had to leave and come to town to take care of somethings so I'll be back this afternoon. Thanks for your patients!!
Randy...Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
I did it all again.... but this time I entered code 0 4 1 3 after I pressed IN STOP on service remote. Still not seeing anything changing on TV.
"Unplugged from wall, waited 10 mins. Plugged back into wall and TV started in STB mode. Turned TV on with original remote. Pressed IN STOP on SRV remote. I didn't see any changes on TV and the voltage at the 24 volt socket is still 1.23 volts."...Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
Unplugged from wall, waited 10 mins. Plugged back into wall and TV started in STB mode. Turned TV on with original remote. Pressed IN STOP on SRV remote. I didn't see any changes on TV and the voltage at the 24 volt socket is still 1.23 volts.
I'm assuming the TV is suppose to go back into STB mode when I press IN STOP?Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
I did start with original remote, forgot to say that in reply. Going to try it all again.Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
My bad...LOL. It started in STB but didn't do anything when I pressed INSTOP with LG SRC remote.Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
no luckLeave a comment:
-
Re: Lg oled65e6p-u.buswljr
nothing happening... acts like it doesn't recognize remote actionsLeave a comment:
-
Re: Lg oled65e6p-u.buswljr
Just got back. Had a power outage right in the middle of our progress. I did the same as earlier to start TV.
"powered with original remote. LED on front is now out, the red LED on main board is on. All voltages on PS except 24 V socket. No image on screen panel."
Do I need to resume from what you said earlier?
"while the set on, send with LG SRC IN-STOP follow it with 0 4 1 3 the set will goes to standby.. leave it in this STB state for at least 10 seconds then turn on the set FROM the SET POWER at the set ( Not...Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
Yes... that's the one I'm referring to....LOL....Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
the SET POWER on the set is the main power button?...Leave a comment:
-
Re: Lg oled65e6p-u.buswljr
powered with original remote. LED on front is now out, the red LED on main board is on. All voltages on PS except 24 V socket. No image on screen panel....Leave a comment:
No activity results to display
Leave a comment: