Re: 24in LG mo PSU/board. Bad caps or Bad board
Well FYI, I was unable to locate the option to change it and more than likely my auto fill created it so the damage is done. Also I've never had a problem with spam because that is what filters are for. Besides there are a lot more efficient ways to acquire someones email address...
ajwrighter@gmail.com
I am Awesome
Last Activity: 09-11-2015, 10:45 AM
Joined: 08-25-2015
Location: Cordova
-
Re: 24in LG mo PSU/board. Bad caps or Bad board
we
I did all the necessary steps before coming here: Checked cables, used different cables, checked software(video card settings), onboard monitor diagnostics, software diagnostics. Then i switched the monitor to a different computer and the fuzzyness still persisted. The lines you see on that picture aren't suppuse to be there....Last edited by ajwrighter@gmail.com; 09-11-2015, 10:33 AM.Leave a comment:
-
Re: 24in LG mo PSU/board. Bad caps or Bad board
Ok so i recapped the power board and it now comes on.... But now its extremely fuzzy with pixilated lines. Ive tested it on two systems and two power cords with same result. Any thoughts on what else i could do? Also i did update driver and used diagnostic software with no help....Leave a comment:
-
Re: 24in LG mo PSU/board. Bad caps or Bad board
Thanks guys, I just wasn't sure if getting a new matching transformer was going to be a option or not. I'll post here the results once I re cap it.Leave a comment:
-
Re: can bad caps cause system bus and memory errors?
your problem sounds similar to a problem my bro had on an old rig of his. He had a bad cap at the video card slot and one of his memory sticks were bad too. No matter how many times he did the mem test... if it ever completed (without blue screen) it would always pass. I'd test each stick of ram one by one (preferably in a different system.)Leave a comment:
-
24in LG mo PSU/board. Bad caps or Bad board
4Cap it0%4Trash it0%0The poll is expired.
The basic caps are all bad but I think the inverter transformer might be bad as well. There is a black burn spot on the other side of the transformer. Though I do know sometimes burn marks can arise just from being hot but
...
So my question is this. Do you think I could get away with just replacing the capacitors or do you think it would be best just to replace the full board. I found one on ebay for 31$ but its in hong kong and it'll be a couple/few weeks before it gets here.... -
Re: New Members - please post your introductions here
Hello, My name is Wright.Leave a comment:
No activity results to display
Leave a comment: