Re: EMU 1820M not working properly

Hi everyone. New here so I don't know if this was already addressed, but I just wanted to let the 1616m owners know that the fix for the 1820 (replacing the two 680 uf 10V caps next to the transformer on the breakout box) also worked to fix my 1616m. I also replaced the five 220uf caps in the same area that appeared to be bulging. None of the caps were leaking, but all seven of them were bulged. The original problem with the unit was that I could only get minimal and unusable output from any of the outputs. There was also a lot of "popping"...