Re: Samsung DTB-H260F HDTV Tuner
I just got done replacing all of the Caps. Success!! The tuner works flawlessly again. Thanks for your help everyone.
Note for those searching these forums in the future, my symptons were the following...
The blue LED would blink for 1/4 sec when the unit was plugged in, then light for ~10 seconds when the power button was pressed. The LED would not light again until the unit was unplugged for a minute.
AllSand
New Member
Last Activity: 10-15-2011, 09:49 AM
Joined: 01-03-2010
Location:
-
Re: Samsung DTB-H260F HDTV Tuner
Thanks for the other part numbers. I searched again and found them in stock. Not sure if I did something wrong or if the status changed. Hopefully I'll know if they solved the prolem by the end of the week.Leave a comment:
-
Re: Samsung DTB-H260F HDTV Tuner
Could someone post an alternate part number for the 1000 uf 10V cap that is first on Bluto's list? The current lead time from digikey is 16wks, AlliedElec didn't have them in stock either. The cap I'm looking for an alternative to is P10224-ND .
I don't think the wife wants to go 2.5 months without Tv...
ThanksLeave a comment:
-
Re: Samsung DTB-H260F HDTV Tuner
MJA28, did replacing the caps fix your problem? My H260 seems to be behaving more like yours than like bluto's. When I plug the tuner in, I get the 1/4 sec LED blink. Then when I press the power button, the LED lights for ~10 seconds before going out. I can't get it to light again unless I unplug it for a couple of minutes.
None of the caps appear to have a domed cap, PPCJ1 has a bit of discoloring on the top but it appears to just be permanent marker.Leave a comment:
No activity results to display
Leave a comment: