Re: Sony KDL-32BX300 horizonal lines flickering
Thanks for all help. Can't seem to find that so guess will trash it and move on.
nelsonba44
Member
Last Activity: 12-05-2015, 02:26 PM
Joined: 08-03-2015
Location: Waldorf, MD
-
Re: Sony KDL-32BX300 horizonal lines flickering
I am not an expert and appreciate all the help. But I don't see a T-CON bd. Is it part of another? the only other board besides first I sent is the one I am sending now. It looks like it is hard wired to screen across top. Thanks again....Leave a comment:
-
Re: Sony KDL-32BX300 horizonal lines flickering
Thanks, here is a pic of screen....Leave a comment:
-
Sony KDL-32BX300 horizonal lines flickering
I have looked for threads but didn't see any. If repeat sorry. These just started. opened back and nothing jumped out. checked cables and tape buy unhooking and hooking back. Here are pics and I am trying to figure out how to sent a short video of screen. Any help will be appreciated. Thanks... -
Re: Samsung PN42A450P1D - No Picture
Update. I purchased a Y sus board and Y buffer from Tri-State Module for $52. Installed and still no picture but sound. So much for that guess. Maybe in power board, will check some more before trashing.
Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
I have found a used Y sus board and Y buffer for about $ 50. on Ebay. Anybody think it might be worth a shot to try it?Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
follow on to last entry. the test patterns were working fine and changing colors. then after 60 seconds the picture stopped. haven't heard any popping or cracking. I have turned off and sometimes unplug and then restarted after hours passed. the picture and sound comes on and then after 30 to 60 seconds the picture stops but the sound continues. hope this info helpsLeave a comment:
-
Re: Samsung PN42A450P1D - No Picture
made it to test screen. lasted 60 sec.Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
Sorry about that. I did it again. picture came on and vscan volts 190 dc. picture went off after about 40 sec. and volts jumping from 185 to 192 back and forth.Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
Thanks for reply. If I did it right there was no voltage there. It was from VSCN spot and grd correct? and AC also?Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
here is pic of full board. haven't taken cap off yet to check bottom. Thanks for all info...Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
here are pic's. hope you can see all right....Leave a comment:
-
Re: Samsung PN42A450P1D - No Picture
Hello, This is my first try to enter. I have the same model. It was my daughters and it was working then she moved. When she tried to turn on, no picture but sound ok. sometimes if off for a while then start up picture comes on for 15 sec and goes off, sound still good. checked fuses and visual check ok. thinking Y sus board.Leave a comment:
No activity results to display
Leave a comment: