Re: Toshiba 46SL863 won't turn on
I measured every pin of PJ91 and I only get 5V from 5V to GND, everything else is 0V
Or does it still have to be connected to the mainboard?
Thanks
siphor3on
New Member
Last Activity: 08-04-2015, 03:05 AM
Joined: 08-03-2015
Location: Lower Saxony
-
Re: Toshiba 46SL863 won't turn on
I think this is what you mean.
There are two connectors from the PSU to the mainboard.
This is what I measure: (while TV is off, can't turn it on)
PJ90 (left chart in the picture):
GND_SOUND to 24V_SOUND: 0V
GND to 12V: 0V
PJ91 (right one):
24V_LNB to GND: 0V
GND to 5V: 5V
Is there anything else I should measure?
Thank you for your answer
...
Leave a comment:
-
Re: Toshiba 46SL863 won't turn on
Let me know if you need more...
Leave a comment:
-
Re: Toshiba 46SL863 won't turn on
I got the feeling that the TV doesn't get the PowerOn Signal. Can I simulate that so the PSU gives 12V and 24V?
GreetsLeave a comment:
-
Toshiba 46SL863 won't turn on
Hi guys,
I have a Toshiba 46SL863 which won't turn on.
The LED in front of the TV is red. On the Main PCB, next to the heat sink, a LED is shining green.
Sometimes the green LED is turning off then on again. It sounds like the CPU or something is active.
The TV doesn't react to the remote or touch buttons.
I can't see any blown capacitors or fuses...
Trying to measure the voltages now.
5V OK
I don't know how to measure 24V LED and 12V..
It looks like the TV doesn't get voltage on PSON pin..?
Any...Last edited by siphor3on; 08-03-2015, 05:01 AM. -
Re: New Members - please post your introductions here
Hi guys!
I'm Patrick from Germany, want to play with some electronics
Leave a comment:
No activity results to display
Leave a comment: