Re: LG 50PA6500 have sound, no picture
Okay, Thank you Hammie
joecool869
Member
Last Activity: 08-30-2023, 07:49 AM
Joined: 07-29-2015
Location: Titusville, Florida
-
Re: LG 50PA6500 have sound, no picture
Shouldn't the panel do something on the lower half with just the lower buffer connected?Leave a comment:
-
Re: LG 50PA6500 have sound, no picture
lower buffer removed panel is black and the readings are
VSC 0v
VY 57 - 68v
VZB 149vLeave a comment:
-
Re: LG 50PA6500 have sound, no picture
the readings with the top buffer removed are now within 1v of the sticker on my panel, correctLeave a comment:
-
Re: LG 50PA6500 have sound, no picture
thats with only the top buffer removedLeave a comment:
-
Re: LG 50PA6500 have sound, no picture
VS 149v
VY 189v
VZB 149Leave a comment:
-
Re: LG 50PA6500 have sound, no picture
Am i measuring voltage with the black probe to the chassis and red to the positive side of the resistor? or measuring voltage across the resistor?
Measuring with the black probe to chassis and red to the positive side of the resistors are
VSC 197 - 202v
VY 253 - 265v
VZB 149v
measuring across the resistor
VSC 0v
VY 57 - 68v
VZB 149v...Leave a comment:
-
Re: The Swap-Shop Thread....
I have a, LG 50PA5500-UG ZSUS BOARD EBR74306901
I need a, LG 50PA6500-UA MAIN BOARD EBT61875107
ThanksLeave a comment:
-
Re: LG 50PA6500 have sound, no picture
Also i found a sticker on the back of the tv that appears to be an invoice number from a repair shop, so they may have diagnosed it and left the main board unplugged.
But i would like to be able to diagnose it myself.
thanks again.Leave a comment:
-
LG 50PA6500 have sound, no picture
Tv was in the trunk of my car when i bought it, the previous owner was moving and couldn't take either with him.
He didn't speak English very well but he said that it didn't work. and wasn't going to take it with him.
So i told him i would get rid of it for him.
I got it home and looked at it and the panel looked good so i figured i would see if i could fix it with information i find here.
I plugged it in and nothing no clicks or lights. so being here in Florida i figured possibly a bad power supply.
I removed the rear... -
Re: New Members - please post your introductions here
Hello everyone, I have been reading non stop for the last week or so and would like to say this is one of the best organized and well behaved site forums i have ever encountered.Leave a comment:
No activity results to display
Leave a comment: