Re: Xbox One No Power

I'm a bit of a noob when it comes to using the DMM.

I tried 2 different settings. The first setting i tried setting the resistance to 200 and measured between DBR1 and DBR3. I got a reading of 97.2 ohms.

The second thing i tried was a direct continuity test. I touched the two points (DBR1 and DBR3) and the DMM beeped, but only for a split second. Once I place the probes and leave them on the points, the DMM no longer beeps.

Any ideas what that means?

Re: Xbox One No Power

After Easter, I finally had some time to look into this xbox.

I took it apart and the pics of the board are attached. At first glance, someone has definitely been in the console before me. It is way too clean and my suspicions were confirmed when there was no thermal paste on the CPU/heat sink.

Another thing i noticed was a scratch on the underside of the board in pic 3.

Is there a way to check if the trace wasnt broken by the scratch?

Other than the scratch, I don't see anything obviously wrong. Thoughts?...

Re: Xbox One No Power

Anyone have any ideas?

I picked up an xbox one locally without any accessories including power adapter etc.

I picked up the xbox quite cheaply and would like to see if I can get it working.

It didnt come with a power adapter so i ordered an xbox 360 to xbox one adapter.

The front panel has no response so i removed the panel along with the ribbon cable, and tried to short the pins to turn it on. I get no reaction from either. I also cannot turn it on using the controller and the power supply doesnt LED does not change colour.

I'm out of ideas at this point on...

Re: Vizio vw46l weird picture

Thankfully i found this thread before spending any money on the main or TCON boards. I have this exact same TV with the same issue.

It was in server for about 8 years so i got my moneys worth out of it.