Re: Panasonic TH-50FP9 flashing lines
Ok It does not seems to inspire someone.
Let me give more detail on what i found :
The issue appear on input DVI, inpiut PC, when PIP feature is ON.
the Test Pattern is OK
My guess is a defective DA Board (Digital Signal Processor, Micom).
A soon as i can open it i will know the exact Ref.
Regards
karl101
New Member
Last Activity: 09-08-2015, 02:47 PM
Joined: 07-18-2015
Location: PARIS
-
Last edited by karl101; 07-25-2015, 10:07 AM. -
Panasonic TH-50FP9 flashing lines
Hello
Can you please guide me in identifying the faulty component of my plasma Screen. When it start, everything is fine. After 5 to 10 sec, lines appears on the screen and they are "flashing".
The issue always exists (all inputs are showing the problem).
I had a look at the service manual and the test mode says everything is ok.
Do someone has an idea to guide me and hopefully find a solution to fix it ?
Regards
Karl... -
Re: New Members - please post your introductions here
Hello
As an introduction, first of all, i'm french (so i will do my best to write correct English, but in some case if it is not true, please let me know it will help to learn)
looking for guidance on some plasma screens that went down nearly a the same a few days ago... i will open a thread if possible.
i used to study electronics a long time ago ...
Regards
KarlLeave a comment:
No activity results to display
Leave a comment: