Re: xenius LCDX32WHD88 (B) Backlight problem
Was wondering if somebody could point me to anywhere i can get some instruction on testing the Transformers.
Thx
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: xenius LCDX32WHD88 (B) Backlight problem
Sorry was looking at wrong side to my total embarrassment. I am using the T.V metal frame for ground and on the correct pin's it reads -
3rd from last 03.16 continuous
2nd from last 03.28 continuous
last 02.53 continuous
when tv is on
Leave a comment:
-
Re: xenius LCDX32WHD88 (B) Backlight problem
i am getting 24.3 on all 3 pin's continuous when i put tv on from standby. when in standby 00.03Last edited by Kevan02; 07-13-2015, 04:00 PM.
Leave a comment:
-
Re: xenius LCDX32WHD88 (B) Backlight problem
Could somebody let me know if the above pic's are ok please and sorry if Y'all busy
Leave a comment:
-
Re: xenius LCDX32WHD88 (B) Backlight problem
Here are some better/closer pics, and i have a multimeter but will need some direction on specific parts to test please.
Thx Kev
Oh this is all the info from sticker's on other side of inverter -:
Sticker 1
K$27 - D028708 - L$AHX915807D701A
I315B3 - 6UA - A401A
Sticker 2
27 - D028708
T87I029. 19 LF
E400003296 - 01L1...Last edited by Kevan02; 07-10-2015, 03:23 PM.
Leave a comment:
-
Re: xenius LCDX32WHD88 (B) Backlight problem
Sorry took so long but here are the pic's...
Leave a comment:
-
xenius LCDX32WHD88 (B) Backlight problem
Hi
First i need to say my knowledge is very basic but have been researching the net to
fix my problem which follows
The tv when plugged in light's up to standby but when i try to switch it on the
backlight lights up for a few seconds then goes out. The tv is on as i get sound
and can see the picture on the screen if i shine a light on it. Having researched
the problem it seemed it was a inverter board problem so bought a replacement
inverter board) at same time noticed that their was a few bad caps on the power board
...
No activity results to display
Show More
Leave a comment: